Just a little reminder....

DWalker

Member
Joined
Sep 1, 2011
Posts
562
Reaction score
0
Location
Clinton/Oneida, TN
You're following a guy around on a website you're banned from, and I'm the nutswinger? LOL I'm not the one with the cheese taste in their mouth. Damn it's summertime too, mist be like peanutbutter LOL. Broken record with an agenda. Like little Lisa Simpson. All the answers to questions nobody asked.

Hey, I'm defending another company on SVT where the customer wants money back for his mistake. Must be nutswinging over there, too. Hell I've even defended ON3. Calls it like I sees it. Pretty straight forward. Got anything other than your usual hum drum attempt an insult?

Oh god he was wrong didn't know what kind of plunging device it had!! Let's go burn that place to the ground and crucify him!!! There's no possible way a CV joint could have had the same symptoms,... oh wait.

Your time might be better spent being contructive instead of trying to prove how super smart you are just waiting for others to slip up. No one cares, really. Look at the size of the crowd rallying behind you. We get it. You don't like him or JLT, they're idiots blah blah blah. Move the fuck on already.

:beerchug2:
 

wbt

Senior Member
Joined
Jul 9, 2010
Posts
2,323
Reaction score
2
You're following a guy around on a website you're banned from, and I'm the nutswinger? LOL I'm not the one with the cheese taste in their mouth. Damn it's summertime too, mist be like peanutbutter LOL. Broken record with an agenda. Like little Lisa Simpson. All the answers to questions nobody asked.

Hey, I'm defending another company on SVT where the customer wants money back for his mistake. Must be nutswinging over there, too. Hell I've even defended ON3. Calls it like I sees it. Pretty straight forward. Got anything other than your usual hum drum attempt an insult?

Oh god he was wrong didn't know what kind of plunging device it had!! Let's go burn that place to the ground and crucify him!!! There's no possible way a CV joint could have had the same symptoms,... oh wait.

Your time might be better spent being contructive instead of trying to prove how super smart you are just waiting for others to slip up. No one cares, really. Look at the size of the crowd rallying behind you. We get it. You don't like him or JLT, they're idiots blah blah blah. Move the fuck on already.

I'll break it down for you as I don't think you understand the intention or meaning behind this thread.....

1. I have nothing personal against Shaun. He has built a customer base who is happy with his tuning and service. No problem. The issue I have is when it comes to mis-information. No one is perfect nor does one single person know everything. That is fine however when we are talking about something as simple as a stock driveshaft, and a person who hangs his reputation and hat on providing a service around modifying these cars, I expect him to get it right. Just like you, many take his word on something as gold, at face value, because they trust what he says without question. As we see in this example that just isn't reality.

2. Let's say it was me who posted that mis-information. Do you think I wouldn't be scrutinized? You bet I would and I provide no product or service to anyone.

3. I am not in this to make followers. I enjoy the hobby and helping others meet their goals. I spend plenty of time being constructive however when something needs to be called out, I have no issues doing so and have no strings attached because I offer no service or product. I tell it like it is and that isn't always popular.

4. Regarding JLT, you realize he made a product change to his CAI due to our testing no? Do you think that would have happened without being critical of it's performance and design?

Your intentions were clearly made in this thread however you just made the wrong assumptions.
 

CPRsm

Senior Member
Joined
Jul 11, 2011
Posts
3,043
Reaction score
1
I'll break it down for you as I don't think you understand the intention or meaning behind this thread.....

1. I have nothing personal against Shaun.
nothing personal lol
"I'll believe that when my shit turns purple and smells like rainbow sherbert."

I understood the point. You had to remind us all what an idiot he is, as if some how we all forgot what you thougt. It comes up pretty often between you and kdanner. Did you REALLY think anyone needs reminding? Or did we need a little attention?

2. Let's say it was me who posted that mis-information. Do you think I wouldn't be scrutinized? You bet I would and I provide no product or service to anyone.
Of course you'd be scrutinized. But probably right there in that same thread. Although no one would probably do it like you. Run to different site, that you don't post on to talk shit. Granted you can't do it there, but then again that's your own fault. Those mean ole mods thought it was a witch hunt also. It's just childish and has gotten old.


3. I am not in this to make followers. I enjoy the hobby and helping others meet their goals. I spend plenty of time being constructive however when something needs to be called out, I have no issues doing so and have no strings attached because I offer no service or product. I tell it like it is and that isn't always popular.
That's awesome. I did the same, without getting banned from websites. I did it with the hellion single recall? Drove the point home, people saw, no need to beat a dead horse. I didn't come here, start a thread to "remind" people how piss poor the kit preforms because bbr put up a TT kit thread. I didn't start one reminding people how hilarious it is they backed it so hard, fought tooth and nail to defend a product they know didn't work well, then start hocking twins when it come out, never to hear from them again about a single kit. Could have. But what would have been the point? Just to remind people who some how forgot with all the jabs and posts throughout this forum?
But again, you've made your point, you don't take his word as gold. Time to move on.

4. Regarding JLT, you realize he made a product change to his CAI due to our testing no? Do you think that would have happened without being critical of it's performance and design?
Do you want a cookie?
Again that's great. Made the point, you won, he changed the design, again, time to move on. Instead in every other thread we have to skim over some crayon eating window licker posting FUCK MMR, AED=FAIL, TOONER this and TOONER that, etc.


Your intentions were clearly made in this thread however you just made the wrong assumptions.
Which was what exactly? I defend against a witch hunt so I'm a nutswinger. And yet some how want us to believe you're not holding a grudge? The roles were quite reversed a few months ago, yet I don't recall calling anyone a nutswinger. We get your point, it's just nobody cares.
 

UltraKla$$ic

PERENNIAL WAXXER
Joined
Dec 28, 2008
Posts
17,151
Reaction score
36
Location
Louisiana
Crayon eating window licker?? Pahahaha


That's HILARIOUS!!!!:roflmao::roflmao:



Just gonna leave this here for the party!! TURN IT UP!!!! lol.



Carry on.
 
Last edited:

wbt

Senior Member
Joined
Jul 9, 2010
Posts
2,323
Reaction score
2
Do you want a cookie?
Again that's great. Made the point, you won, he changed the design, again, time to move on. Instead in every other thread we have to skim over some crayon eating window licker posting FUCK MMR, AED=FAIL, TOONER this and TOONER that, etc.


Which was what exactly? I defend against a witch hunt so I'm a nutswinger. And yet some how want us to believe you're not holding a grudge? The roles were quite reversed a few months ago, yet I don't recall calling anyone a nutswinger. We get your point, it's just nobody cares.

Lol! What roles would that be? Before you started washing balls?

It's OK....we all know until your kit produces any good track numbers it is no different than the BBR/Hellion kits. Keep playing around in stadium parking lots. :roflmao:

BTW - the vendor protection hypocrisy on svtp is why I ASKED for them to ban me. I want no part of a site that censors it's members to protect scumbag vendors who want nothing more than to pilfer pockets.

Again another feeble attempt by you to detract from the purpose of the thread. If you don't like what I post, put me on ignore. The feeling is quite mutual.
 

CPRsm

Senior Member
Joined
Jul 11, 2011
Posts
3,043
Reaction score
1
Lol! What roles would that be? Before you started washing balls?
The role where one of you two were protecting a buddy and I think you were whining about not being able/not wanting to post some info. Coming to a buddy's rescue like a damsel in distress. Give the criteria here one for a nutswinger here, on of you would have been knee deep in taint in that thread.

It's OK....we all know until your kit produces any good track numbers it is no different than the BBR/Hellion kits. Keep playing around in stadium parking lots. :roflmao:
I know, 500+ miles to the track one way, run a 10@133, drive back home is weak sauce. I'm sure you conveniently missed that with your head up Shauns ass looking for something to complain about. If you'd come up for air every once in a while you may have seen that.
Better numbers are coming, keep clinging to that though, not much time left. I've prototyped, jigged and produced 4 different turbo kits in the last 2.5 years. They take time to do right and test. Despite what others say I don't know anyone who tests more than we do. But excuse me if I don't jump thru hoops just to please you. I'm not out to set records and run the number first time out like you think everyone should do.




BTW - the vendor protection hypocrisy on svtp is why I ASKED for them to ban me. I want no part of a site that censors it's members to protect scumbag vendors who want nothing more than to pilfer pockets.
There's no hipocricy there. I thrashed bbrs ass over there along with here. Difference was I did it with tact and didn't get banned from either site. "It's not what you say it's how you say it" is a popular saying over there. But you got mad because you didn't get your way. Why don't you asked to be banned here as well? Fuck ignoring, we'll do this shit old skool WWF style. Why don't we have a poll to see who gets banned? We'll find out if your advice is as valuable as you think.
 

JEWC_Motorsports

S197 Junkie
Joined
Aug 22, 2010
Posts
20,596
Reaction score
1,715
Location
Texas
As entertaining as this is I think its run its course.

FWIW I'd trust Brett and Kris with my car way before AED.
 

tjm73

of Omicron Persei 8
Joined
Jun 9, 2010
Posts
12,092
Reaction score
1,642
Location
Rush, NY
Are you two really arguing about a problem on a thread on a different board???
 

Mystickeith50

Senior Member
Joined
Jul 20, 2011
Posts
4,942
Reaction score
2
Location
South Jersey
I agree but.......I agree with cprsm. The point has been hammered over and over. Who cares!!! Really, who cares? One thing I don't think that wbt and kdanner gets is they will never "win" this battle with everyone. I'm a well driller in business for myself....I'm damn good. I do better work than anyone in my area. My work speaks for itself, I don't have to remind people how good I am and how much my competitors r hacks. That's childish and borderline arrogant. But guess what, those other well drillers in my area have customers who love them even though I think there work is shitty. No matter what I do, my competition will have nutswingers too...no matter what. Just take the higher road, the u will look professional n not childish.
 

wbt

Senior Member
Joined
Jul 9, 2010
Posts
2,323
Reaction score
2
The role where one of you two were protecting a buddy and I think you were whining about not being able/not wanting to post some info. Coming to a buddy's rescue like a damsel in distress. Give the criteria here one for a nutswinger here, on of you would have been knee deep in taint in that thread.

English isn't your primary language is it? You lost all credibility with the above. If you are going to make a claim, back it up with some facts.

I know, 500+ miles to the track one way, run a 10@133, drive back home is weak sauce. I'm sure you conveniently missed that with your head up Shauns ass looking for something to complain about. If you'd come up for air every once in a while you may have seen that.
Better numbers are coming, keep clinging to that though, not much time left. I've prototyped, jigged and produced 4 different turbo kits in the last 2.5 years. They take time to do right and test. Despite what others say I don't know anyone who tests more than we do. But excuse me if I don't jump thru hoops just to please you. I'm not out to set records and run the number first time out like you think everyone should do.

Are you talking about this?
http://www.s197forum.com/forum/showthread.php?t=96846
...and the obscure post made here?
http://www.s197forum.com/forum/showpost.php?p=1735267&postcount=2

Hmmm.....700+WHP produces a high 10 sec. car. You go.

There's no hipocricy there.
If you believe that you have lost all hope. That site constantly edits/deletes posts to protect their vendors. Facts be damned.

"It's not what you say it's how you say it" is a popular saying over there. But you got mad because you didn't get your way. Why don't you asked to be banned here as well? Fuck ignoring, we'll do this shit old skool WWF style. Why don't we have a poll to see who gets banned? We'll find out if your advice is as valuable as you think.

You're one to talk making incomprehensible posts. I like that you think you know how I feel. I didn't realize you were part of: http://www.californiapsychics.com/index.aspx The only thing that site offers is daily entertainment from the ridiculous posts made.

If the admin/mods want to ban me then so be it. I have no issues with this forum and think it's one of the better managed/modded out there. I didn't always feel that way.

I suppose if people didn't care about my opinion I wouldn't receive the PM's I do.

Either way, the only thing you have accomplished here is destroying your own credibility. It's pretty entertaining seeing you come unglued. :thumb:
 

CPRsm

Senior Member
Joined
Jul 11, 2011
Posts
3,043
Reaction score
1
English isn't your primary language is it? You lost all credibility with the above. If you are going to make a claim, back it up with some facts.
Sorry the iphone isn't fat finger friendly. That automatically means English isn't primary language. Still grabbing at straws though I guess. No, didn't post a link. It was in a Tx mile thread on SVT. Fact is I just don't care enough to go find it for an E battle.

Are you talking about this?
http://www.s197forum.com/forum/showthread.php?t=96846
...and the obscure post made here?
http://www.s197forum.com/forum/showpost.php?p=1735267&postcount=2

Hmmm.....700+WHP produces a high 10 sec. car. You go.
Was I supposed to start a new thread "ATTN WBT" so it was a valid time for you? Now the kit runs a number with big MPH, and it's still not good enough lol. Oh wait I need proof, too. Was there a timeslip shot in there anywhere?

No, neither of those links are actually where I went into any depth. Again if you had come up for air.....

You're fun to watch though.
"Dyno numbers don't matter, take it to the track."
"Here are the numbers. Shitty ET, MPH shows some power."
"With 700rwhp+ I'd expect 6's."
"We were testing the car on low boost for the first outing, not 11psi."
"Well, you should still go 6's."
"Yes it'll go 6's when it's turned up."


I could see you in the first thread chomping at the bit so bad. You just wanted to talk shit so bad you couldn't stand it lol. And yet here we are again at the same boost and power level as before, and you repeat the same ignorant comments over and over. As I said in the first link, the boost was not up, nor was it at the 1/4. You assumed too much yet again. The car has made 760rwhp+, but was not raced at that level for those times. Even if the car made 1000rwhp but we raced on 8psi, you would still expect an 8sec slip. The cars mph backed up the dyno rwhp to the "T." It was not 700+ as much as you would liked it to be. Whenever the owner wants he can drop the clutch higher than 1500rpm, and he can get the ET. Sorry it didn't run good enough for you on the third outing. I'm sure you hit your N/A 10 pass within three outings though right?
Just for you next time I will start a thread loud enough for you to see. I need to get your approval when we turn it up.



If you believe that you have lost all hope. That site constantly edits/deletes posts to protect their vendors. Facts be damned.
That site like any, deletes trolling posts, even if facts are included in the post. You confuse hiding facts, with mods that don't want to sift thru your rubbish, and just delete it all.


Either way, the only thing you have accomplished here is destroying your own credibility. It's pretty entertaining seeing you come unglued. :thumb:
No one's come unglued sweetheart. Nobody's lost their temper or asked admin to ban them. There's a difference between unglued and telling someone they're beating a dead damn horse and no one cares. Credibility is a funny word to use. As I recall you couldn't make your point without calling me a nutswinger and ballwasher. I don't think any credibility has changed. I think most are in agreement, we're just tired of hearing you run your jib over and over about the same thing. ie, the post above you.
 
Last edited:

Weou09

Senior Member
Joined
Apr 22, 2010
Posts
1,885
Reaction score
2
Location
Bham, Alabama
This is so stupid. Really just because Dustin doesn't see your point of making thread after thread about the same shit? You say this isn't personal and you want nothing to do with that other forum yet you obviously shadow him and that forum. Remind me what you bring too this forum again? You have a fast Mustang that is a big secret and has been accused of being more then what it is. All your post seem to be demeaning and useless. I agree, I don't like the way you represent the Mustang community and I will add you to my ignore list. Dustin it is no use wasting time on this loser. His shit is better than anyone's and anything less is just wrong or idiotic.
 

N20JUNKY

Member
Joined
Feb 1, 2011
Posts
127
Reaction score
0
I'm not on either side but I do believe kris and brett bring a lot to this forum, Everyone may not like how blunt they are but they have info that's backed up time and time again.
 

wbt

Senior Member
Joined
Jul 9, 2010
Posts
2,323
Reaction score
2
It was in a Tx mile thread on SVT. Fact is I just don't care enough to go find it for an E battle.

Par for the course with you in this thread. You were proven wrong defending your buddy, and are wrong about this as well.

Was I supposed to start a new thread "ATTN WBT" so it was a valid time for you? Now the kit runs a number with big MPH, and it's still not good enough lol. Oh wait I need proof, too. Was there a timeslip shot in there anywhere?

No, neither of those links are actually where I went into any depth. Again if you had come up for air.....

I could see you in the first thread chomping at the bit so bad. You just wanted to talk shit so bad you couldn't stand it lol. And yet here we are again at the same boost and power level as before, and you repeat the same ignorant comments over and over. As I said in the first link, the boost was not up, nor was it at the 1/4. You assumed too much yet again. The car has made 760rwhp+, but was not raced at that level for those times. Even if the car made 1000rwhp but we raced on 8psi, you would still expect an 8sec slip. The cars mph backed up the dyno rwhp to the "T." It was not 700+ as much as you would liked it to be. Whenever the owner wants he can drop the clutch higher than 1500rpm, and he can get the ET. Sorry it didn't run good enough for you on the third outing. I'm sure you hit your N/A 10 pass within three outings though right?

133MPH is the same MPH JPC ran with a N/A 5.0. Is that your benchmark? You need to aim higher. 140 would be respectable. There was a lot of hype generated around your turbo stuff and here we are a close to 32 years later and still seems limp. Calling like it is. How do you think that car would run in our conditions or maybe Florida conditions?

That site like any, deletes trolling posts, even if facts are included in the post. You confuse hiding facts, with mods that don't want to sift thru your rubbish, and just delete it all.

Excuses.....you are starting to sound like the IRS coverup.

Credibility is a funny word to use. As I recall you couldn't make your point without calling me a nutswinger and ballwasher. I don't think any credibility has changed. I think most are in agreement, we're just tired of hearing you run your jib over and over about the same thing. ie, the post above you.

It was your mission to come in and prove me wrong and when that didn't work, you decided to turn this into a vs. thread.

This is so stupid. Really just because Dustin doesn't see your point of making thread after thread about the same shit? You say this isn't personal and you want nothing to do with that other forum yet you obviously shadow him and that forum. Remind me what you bring too this forum again? You have a fast Mustang that is a big secret and has been accused of being more then what it is. All your post seem to be demeaning and useless. I agree, I don't like the way you represent the Mustang community and I will add you to my ignore list. Dustin it is no use wasting time on this loser. His shit is better than anyone's and anything less is just wrong or idiotic.

I agree it has gotten rather silly. Let your buddy Dustin know how far off he decided to take it. He doesn't like to be wrong. It's run it's course and this will be my last post in it.

I do read threads on that forum on occasion. This one really stood out and found humor in it so I shared. If you want to know who shadows who, you should check out the AED Facebook page. They have a nice clear pic of my car on there. I found it rather comical. It's all in fun. If anything I have generated a lot of free advertisement for them.
https://www.facebook.com/AEDHP?fref=ts

My car a big secret? What would that be? I have shared everything about it. Click on the link in my signature and you will see a full and complete mod list in the description. There are folks in this thread who have seen it at the track as well. Ask them what my big secrets are. Hell, I will be running it at NMRA Bowling Green in October. You can meet me face to face and look it over for yourself.

If you want to question what I contribute, use the search function. Google works too.
 

S197 GT

PINK Casting Director
Joined
Apr 5, 2007
Posts
5,431
Reaction score
31
Location
Nor Cal
As someone who had a public battle with AED, I gotta say that your schtick is getting old.

I just wish you let your accomplishments speak for themselves, because your piss poor attitude is overshadowing them.

You'd be better off to be known for your tuning and track times vs being known for being a whistle blower.

Seriously. You've got too much good going on to be focusing on other's issues.
 

CPRsm

Senior Member
Joined
Jul 11, 2011
Posts
3,043
Reaction score
1
Par for the course with you in this thread. You were proven wrong defending your buddy, and are wrong about this as well.
Oh I found it for you. Cuz if no link, you must be lying right? Would hate to disappoint, study up.
http://www.svtperformance.com/forum...unning-texas-mile-can-you-update-us-here.html

Buddy or acquaintance had nothing to do with why I posted. I will break it down Barney style for you. I defend people I don't even like, out of basic principle.

Here's me defending Hellion.
http://forums.corral.net/forums/tur...portant-turbo-technology-you.html#post9859792

Here's me defending mmr.
http://www.svtperformance.com/forum...mr-worst-customer-service-5.html#post13092599


Uh oh, here's me defending lund and company
http://www.svtperformance.com/forum.../893168-ken-b-lund-tt-kit-2.html#post12454846

I know for a fact I've defended on3 as well and could find that too if I looked, but these were easy. Hell I bet I defended more companies, than companies you HAVEN'T fought with.

So now was I washing all these balls also? Or does your ball washing theory hold water now? I seemed to have defended most of the food groups here. You've got your head burried so far in a witch hunt you can't see the forest for the trees. Do I need to slow down here at all for you? I defended him because I agreed with him. Even if we were both 100% wrong. Principal like I said, not friendship or ballwashing. Are we crystal clear now?




133MPH is the same MPH JPC ran with a N/A 5.0. Is that your benchmark? You need to aim higher. 140 would be respectable. There was a lot of hype generated around your turbo stuff and here we are a close to 32 years later and still seems limp. Calling like it is. How do you think that car would run in our conditions or maybe Florida conditions?
uh oh, the typical "woulda, coulda, shoulda if your DA was as bad as ours" fall back excuse we see from you. (It must have some merit if you're trying to use DA to minimize the trap speed.)
133 isn't a bench mark, it was the first 1/4mi outting. See you grabbing for straws again though. Lightweight race car runs same mph as 4,000lb car. Newflash! LOL If that's the case they drug your car up and down the track sideways didn't they? Any other kits doing 133 on 8psi @ 4,000lbs? Limp is your wrist, like your arguement. You mention below turning into a Vs thread, but here you are, the little engine that could. Just chugging away at the dumbest comparisons and points you can come up with.
"Damn, 133 is fast. I'll have to compare it to a race car."
Even if the car hits your "respectable" 140mph, we'll hear from you
"140mph as a benchmark? Mmrs coyote does 200+."

Still haven't answered whether or not your car ran 10's by the third outting. You must have since you're riding me so hard about it. I was pretty happy ET and mph first time to the 1/4. Actually I was more excited over the inlet temps to be honest. 10's was the easy part lol.


Excuses.....you are starting to sound like the IRS coverup.
REALLY?! LOL
You're the one claiming the conspiracy you were being moderated to cover up the evil companies trying to get rich. I wasn't covering anything. I gave you a reason why, no denial. Have you been drinking during any of this?


It was your mission to come in and prove me wrong and when that didn't work, you decided to turn this into a vs. thread.
Actually that started with your buddy beating the "FAIL" drum
Doesn't matter what driveshaft he has, there is no slip yoke in that trans. AED = FAIL, AGAIN!


Then when he and I were "discussing" things, you jumped in.

Can you link those TSB's about the output shaft/flange issues on the 6R80?

...this certainly doesn't apply does it?
http://www.ford-trucks.com/forums/1140630-slip-yoke-bump-is-back-after-tsb-repair-what-next-2.html
So, Dustin didn't turn it into a VS thread. You couldn't make your point, so you resort to a 10 year olds tactics. And that's being generous on the age. I was dying to see "Poopoo head" come out. "I know he talks to Shaun. I know, I'll call him a nutswinger. That'll show him I mean business!!"


I agree it has gotten rather silly. Let your buddy Dustin know how far off he decided to take it. He doesn't like to be wrong. It's run it's course and this will be my last post in it.
ahhhh, you're going to blame it all on me, take your ball and leave. At least I added to the entertainment value of the thread. Nut up son, take some responsibilty.
 

Weou09

Senior Member
Joined
Apr 22, 2010
Posts
1,885
Reaction score
2
Location
Bham, Alabama
My car a big secret? What would that be? I have shared everything about it. Click on the link in my signature and you will see a full and complete mod list in the description. There are folks in this thread who have seen it at the track as well. Ask them what my big secrets are. Hell, I will be running it at NMRA Bowling Green in October. You can meet me face to face and look it over for yourself.

If you want to question what I contribute, use the search function. Google works too.

You don't think before you type do you? I know that you have said what your car is. I was portraying it as others see it. I do not have to search because you are a one trick pony. You demean others and carry on till its so childish that everyone backs out or loses interest. I'll make this statement one more time, you say you want nothing to do with that forum, and member, yet you come here and post shit like this. What you are failing to realize is this is the kind of shit that belongs on other forums not here.
 

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top