Mmr 5.0 all out build

[HOLYWD]

No I'm saying his whipple ported is now a 2.8

 

[Pike2244]

Wow, so it goes from 2.3 to 2.8???

 

[HOLYWD]

I'm pretty sure his did

 

[Pike2244]

Sounds like a nice setup

 

[HOLYWD]

That it is

 

[Cobra SS]

The steeda kit is for running a bigger belt so that u don't have belt slip or breakage!! That's it. What made me get the steeda kit is I wanted the 20lb pulley set the offer and that I actually put the SC on it's OWN belt system not sharing anything with the alternator power steering and a/c.

The kenne bell is a 2.6 liter I believe. And the port cost me 800 bucks from Stegemier. The specialize in porting out cobra's supercharger, but will do whipple's too. U just have to ask.

what are your final numbers?

 

[ryanralston07]

I emailed Stiegemeier about the port...he said it would only cost me $495...why did your's cost $800???

 

[HOLYWD]

Cuz its special

 

[strong_j]

Because he did some extra stuff to it, but shhh don't tell anybody!! lol.
But idk. I asked for him to give me the most aggressive port he could do and change out the snout for me and the elbow part of the supercharger he made it port match to my whipple monoblade throttle body and it cost me 797.00. I would look at me receipt to show everything, but when they shipped it back to me intercooler fluid got all over the receipt and washed out all the ink. I've been trying to get another copy for months now!!

 

[strong_j]

Cobra SS it's still in the shop for fuel system and dyno!! No number yet.

 

[Pike2244]

So hows the MMR engine working out???

 

[strong_j]

^don't know. Don't have it back yet!! hopefully I will have it back late next week!! (fingers crossed)

 

[Pike2244]

Don't want to sound like a jerk but is the build just taking a long time or did something go wrong recently??? So you getting excited or what??? My build should be finishing up in a few weeks and I'm already so freakin excited!!!!

 

[strong_j]

I've been excited when my car was finally at the shop and they told me they would have it done in by the weekend before Halloween. They've had it for almost a month and a half and still haven't finished it soo now I'm alittle more pissed then excited. Lol.

Nothing has gone wrong just everytime I call them it's always were waiting on this part or you'll have it by the end of next week. I think they have every single part in they need so it should be done soon, but who knows.

Right now I've been helping Hollywood do his car so that's been keeping me occupied and I'm excited to finally get him boosted!!

 

[strong_j]

Hey pike send me a link to ur build!! I didn't know u were doing one.

 

[HOLYWD]

Bewst !!!!!!!!

Thanks again !


Car wouldn't be so close without my boy !

 

[Pike2244]

Yeah I'm sorry I thought I told you about it.... I spun a bearing so it gave me an excuse to do a build that I wanted... So I was initially looking at MMR (and please don't take offense to what I'm about to say b/c I do not mean any disrespect) as well then I did some research and looked at your thread and decided it wasn't the way to go. So I bit the bullet and went through my shop and paid a little bit more (which they get from Livernois)... CR: I think we decided to go 9.1... Heads / Cams I replaced on my original setup so I am going to use those. I am going to go w/ a 2.3 whipple, so I was thinking I will be around 600rwhp - 650rwhp... Anyways, let me know what you think!!! I can give specifics if you want...

Man I am sorry it's taking so long. So the shop is just taking their sweet time???

 

[HOLYWD]

Lol @ not wanting to offend Joseph and MMR =)

 

[Pike2244]

Well I know his feelings I believe on MMR but I still don't want to sound like a jerk!!!

 

[HOLYWD]

Lol

His motor will be fine !