Need help with finding flow formed rims

[stang_gang]

I want to go with a square 18x10 setup
So I’ve been looking at these but they’re 18x10 +35 https://lmr.com/item/WK-177903/mustang-sve-r350-wheel-kit-graphite-19x10-05-14
And the rims that apex make that are 18x10 +43
I’ve looked at a ton of fitment threads but I need to know if 18x10 +35 will fit all around without poking out of the fenders?

I would like to go with the SVE setup because it will be about 500 bucks cheaper if they will fit

 

[oldVOR]

Are you looking for 18's or 19's? You mention 18's but the link is for 19's.
Anyway, with 10's and +35 and depending on tire selection, you will probably have poke on the rear and maybe the front depending on camber settings.

I've had ForgeStar 19x10 ET42 w/285-35 PS91 (11.4 section & 10.4 tread widths) and they sit flush on the rear and slightly inset on the front w/factory camber settings.
I've also had APEX 18x10 ET43 w/285-35 R-S4 (11.7 section & 10.6 tread widths) and they sit flush on the rear and slightly inset on the front w/factory camber settings.

 

[stkjock]

Please review the tech posting rules before posting in the tech sections.

Moved

 

[stang_gang]

Are you looking for 18's or 19's? You mention 18's but the link is for 19's.
Anyway, with 10's and +35 and depending on tire selection, you will probably have poke on the rear and maybe the front depending on camber settings.

I've had ForgeStar 19x10 ET42 w/285-35 PS91 (11.4 section & 10.4 tread widths) and they sit flush on the rear and slightly inset on the front w/factory camber settings.
I've also had APEX 18x10 ET43 w/285-35 R-S4 (11.7 section & 10.6 tread widths) and they sit flush on the rear and slightly inset on the front w/factory camber settings.

Yeah I was looking for 18s but since those are so much more cheaper I wouldn’t mind running 19s. They say they’re meant for 2005-20xx mustangs so I figured they might fit but I read up on fitment and I thought with a 10in wide rim you’d want +45 mm offset so it fits correctly. Any other suggestions?

My car is completely stock just saying

 

[stang_gang]

So bought the r350 flow formed rims from lmr and I’m impressed. They got the measurements spot on for offset etc. look at this fitment. I’m on stock suspension and I have 0 rubbing so far.

 

[stang_gang]

 

[stkjock]

nice 4x4

 

[stang_gang]

nice 4x4

Haha you’re so funny next to lower it lmao I know it’s a little too high for my taste

 

[stang_gang]

nice 4x4

Better?

 

[stkjock]

much!

 

[oldVOR]

Tons better!

 

[06JET]

Looks great. How about the fit now? Any rubbing during turning or while hitting bumps in the road?

 

[stang_gang]

Looks great. How about the fit now? Any rubbing during turning or while hitting bumps in the road?

no rubbing what so ever