1) copy of timeslip--if you don't have it, unless you have video, forget it. If you only have video, please provide the 60', 1/8-mi and 1000' incrementals
2) The following vehicle information:
- Cubic inch displacement (CID) of engine
- Type of transmission (by model number)
- Size and Manufacturer of power adder, or N/A
- Pounds of Boost, of N2O shot (or both if applicable)
- Rear Gear ratio
- Make and type of tire
3) your time also has to be backed up by another time within 2%.


First run on the new motor today. Lots of room for improvement but in the meantime I still ran my fastest times to date. It was 85 degrees as well, so a cool 60 degree evening will produce times about .4-.5 faster.
Engine is a JDM 302E Stroker (3v)
T56 Magnum transmission
VMP TVS1900 blower at 11 lbs boost
3.73 gears and Hoosier QTP tires
R/T --- .208 ---- .103
60' --- 1.695 ---- 1.722
330 -- 4.764 ---- 4.809
1/8 -- 7.229 ---- 7.288
MPH - 99.60 ---- 98.79
1000- 9.349 ---- 9.418
1/4 -- 11.120 ---- 11.192
MPH - 127.93 ---- 127.80
Was crowded today and waited all day for two passes. Would have been 4:30 or later if I tried to wait for another pass. Too hot anyway.

Tune and xpipe prolly worth .5-.6 tenths

Finally broke into the 10's
http://www.youtube.com/watch?v=cRn5g9rETgU
2012 Boss 302
Naturally Aspirated
MT82
M\T ET Drags 28 x 9
3:90 gears
Kooks headers X pipe
GT500 Mufflers
Steeda CAI
E85
47 LB Injectors
3760 LBS
w Driver
DA (375)
Ambient 55 Degrees
![]()
Duece212? Who is Bud?