Pro star fitment

[Jperezav2009]

Ok guys bare with me. Just picked up Greg weld pro stars
15x 10 and 15x3.5 the 15x10 have a 6.5 backspacing. Just tried to mount them but looks like it rubs brake. Will grinding down brake help out with fitment issue or will spacers help?

 

[quiksilver15]

FYI you're going to need a sway bar relocation bracket as well.

 

[Jperezav2009]

Iam aware of the sway bar relocation. But it grinds with caliper. Would a spacer hell or should I just grind it down?

 

[Jperezav2009]

here is pic of rims. Not sure what model they are.

 

[SlvrS197]

You need a 7.5 backspace on the 10 inch wheels also. They will probably stick out some.

 

[stkjock]

miss this did ya?

http://s197forum.com/forum/showthread.php?t=13158

 

[Jperezav2009]

Grinded down the calipers a bit. But now cant get lug nuts on because the holes on rim are either too close too wheel stud. Can only get one lug nut on and cant even get a thread on any of the others.

 

[The Big Herm]

New studs are needed for the fitment of the wheel. Search button, you failed us again!

-Bryan

 

[Jperezav2009]

So I need to order longer studs inorder to get these wheels on. Got it. Also found out they are dragstar and not pro stars.

 

[Jperezav2009]

So the fronts went on well with spacers and all lug nuts went in without a problem.the rears are clear from brake calipers, but can only get one lug nut on. Can fit the other lug nuts in. Any help or suggestions?