S&H Turbo Kit Build

[JoshK]

I do not believe that there are any shops in nebraska that i would let tune my car(and I had it tuned here once). It is really easy to do datalogging, and get a good tune.

 

[06stangia]

So you got it tuned by lito and you liked the tune? Also what did you need to do it that way.

 

[W3bb3r04]

So you got it tuned by lito and you liked the tune? Also what did you need to do it that way.

I did mine through lito. All you need is a wideband with an analog output, a FireWire cable, an SCT handheld and a laptop obviously. Easy as can be and he is great to work with! Best pricing too!

 

[06stangia]

So you did take it to a dyno to get the #s. Those are the kinda #s I am looking for.

 

[JoshK]

Lito tuned my car last year at 8lbs and retuned it this month with the built motor. I also let him know that I was dynoing today, so he made sure he could look at my logs from the dyno runs I did today. He is great guy to work with and you won't be disappointed. Ran my car all the way up to 17lbs of boost today. Build thread is in the "Pimpin It" subforum

 

[Jusmiwill]

Gonna be using him as well very excited and highly recommended

 

[W3bb3r04]

So you did take it to a dyno to get the #s. Those are the kinda #s I am looking for.

Yup! I took it to the dyno after the tune was totally completed and it made those numbers only pulling to 6k rpm.

 

[roberts]

06 are u happy u went with this kit and how bad was it to put In?

 

[06stangia]

Only half way done installing the kit it is going ok the directions suck and got a couple of wrong parts. I wish I had waited till I had all the parts before tearing it apart.

 

[mikeyfitz]

Only half way done installing the kit it is going ok the directions suck and got a couple of wrong parts. I wish I had waited till I had all the parts before tearing it apart.

The directions really aren't that bad lol. It's pretty self explanatory though.


Sent from my iPhone 5 using Tapatalk

 

[Bobby]

That what we were thinking. I actually put the first kit together without the instructions.

 

[mikeyfitz]

That what we were thinking. I actually put the first kit together without the instructions.

I didn't use instructions either lol, I started to, but then I could already see it without looking lol.


Sent from my iPhone 5 using Tapatalk

 

[roberts]

do u have stock internals? and also just a question im going to be getting a kit soon but wanted to see what shold I put in the motor for it to hold at least 700whp for while?

I know rods and pistons but what else should I get?

 

[Bobby]

Just do like Jeremy did. Stock crank Manley rods and pistons along with arp head studs main studs good clutch TSS oil pump gears.

 

[roberts]

bobby im just seeing how much all it would cost for parts, thought about doing all that before I do a turbo but idk yet

 

[JoshK]

See my build thread in Pimpin It to get an idea on an engine build

 

[06stangia]

Got my 07+ crossover installed.

 

[06stangia]

Also got my gauges mounted just need to get them wired up.

 

[Makdaddy]

Lookin Good

A little bit everyday

 

[06stangia]

So it looks like the kit did not come with the tee's, barbs, or vacuum hose to hook up the wastegate/blow off valve.