Tuner that will respond?

[race4food]

I'm looking for a tuner for my engine mods and swap. I called LUND, JMS, and a few others and can't get more than a cursory reply if any.

What is the deal? Are these guys so much a premadonna that I'll need to do it myself?

 

[crjackson]

Good question. I went with a local/reputable Dyno-Shop. That way I can go get in his face when I need to.

Barring that, I’d give Shaun at AED a call and see what happens.

(916) 715-7569

 

[JEWC_Motorsports]

Most of them have a website and you have to access support thru it.

 

[eighty6gt]

They hate swaps and stuff as they think there'll be mechanical issues and atypical stuff, and they won't make any money on the job.

Probably correct.

I recommend you get HP tuners and do it yourself. N/A?

 

[Juice]

You may end up doing it yourself. I got my first tune from a tuner. After two years of revisions and.getting nowhere, I bought the sct software and.had all my quirkie issues fixed in about 4 months. (Pretty complex pcm) And I have a gen1, the easiest coyote generation to tune.

 

[JEWC_Motorsports]

And I have a gen1, the easiest coyote generation to tune.

Thats not completely true. Depends on pcm code how easy it is lol. Mine is the worst to tune.

 

[Juice]

Thats not completely true. Depends on pcm code how easy it is lol. Mine is the worst to tune.

What is difficult with yours? This copperhead is a different animal for sure when it comes to tuning.

 

[JEWC_Motorsports]

The support for different pcm numbers. I had ygk1 and it was a bitch to tune so it was changed to one that had better results.

 

[Sactown]

I would email Shaun at [email protected], he has been tuning my car for years, is pretty responsive I have sent him several customers.

But like so others have said, tuners are hesitant to tune cars with engine swaps unless they did the work themselves due to the number of "unknowns"

 

[Dino Dino Bambino]

I'm looking for a tuner for my engine mods and swap. I called LUND, JMS, and a few others and can't get more than a cursory reply if any.

What is the deal? Are these guys so much a premadonna that I'll need to do it myself?

Did you contact Lito (Manuel Pazo)?

[email protected]

 

[stkjock]

Did you contact Lito (Manuel Pazo)?

[email protected]

when did he start tuning Coyotes?

 

[Juice]

Anywho, from what I have read, gen 2 is worse fro

Did you contact Lito (Manuel Pazo)?

[email protected]

This is a coyote swap. Lito did not do coyote tunes as of about two years ago.

 

[Dino Dino Bambino]

This is a coyote swap. Lito did not do coyote tunes as of about two years ago.

Thanks for that bit of info. Didn't know that. I was certain about Lund and VMP doing Coyote tunes. What about Power By The Hour?

 

[Juice]

Thanks for that bit of info. Didn't know that. I was certain about Lund and VMP doing Coyote tunes. What about Power By The Hour?

I have the sct software. I am not relying on anyone for stuff I can do myself.

 

[stkjock]

Thanks for that bit of info. Didn't know that. I was certain about Lund and VMP doing Coyote tunes. What about Power By The Hour?

I don't think PBH does tuning


OP - have you reached out to Palm Beach Dyno? Ken B there is pretty good

 

[tjm73]

How deep into the swap are you? Is a Holley Terminator EFI out of the question? Allows you to tune it yourself. You are beholden to no one and things happen on your schedule.

 

[MrBhp]

Bridge City Texas is only a 3 hour drive from Baton Rouge. Triangle Speed (in Bridge City) is the shit.

 

[race4food]

Palm beach sounds like a go and triangle speed!
It’s already wired and I have too much tied into the current control system to move.

 

[race4food]

Triangle speed called me back yesterday and said yes. Easy, when do you want to do it! Thanks guys

 

[06 T-RED S/C GT]

JDM engineering

www.teamjdm.com (732) 780-0770