My custom 08 build

[teeje]

Hey yall. I've had a lot of people interested in my build. This is mostly just going to be eye candy.

All carbon fiber interior is real, no overlays or stickers, some pieces custom made by me.

Air vents are out of a 2016 mx5. Slight modification required.

Forged engine, parts all from Joey Teats at Apocalypse performance
-Manley forged 8 bolt crank
-Molnar rods
-Upgraded pins
-JE pistons 9.5:1 compression
-Bored 10 over
-Boundary oil pump
-Kennebell intercooled supercharger at 20psi
-T56 magnum xl and one piece driveshaft with billet yokes
-Mcleod rxt clutch
-Custom grind cams from Todd Warren (everyone boosted should get these)
-Fore l2 return fuel system with fc3 controller and hobbs switch and fore vacuum/boost manifold
-FIC1000 Injectors
-Ford performance twin 62mm throttle body
-BBK longtube headers
-Jlt catch can
-Steel braided clutch line
-Front Brembo brakes

Bmr suspension

Gt500 front/rear end facias


There's a bunch I'm not listing here but enjoy.

Sent from my SM-G998U using Tapatalk

 

[Midlife Crises]

Very nice Mustang. Have you rolled it on a Dino and who tuned. It?

 

[Juice]

That is a lot off "not eye candy". lol I mean you cant see pistons, rods, cams, etc.
Just sayin'

 

[teeje]

That is a lot off "not eye candy". lol I mean you cant see pistons, rods, cams, etc.
Just sayin'

Lol yea you're right. I wish I took pics of them. I have pics of the clutch engine and trans though. Missed opportunity

Sent from my SM-G998U using Tapatalk

 

[teeje]

Very nice Mustang. Have you rolled it on a Dino and who tuned. It?

I have not yet. I just got 330 miles on it. Lito is tuning it and I'm datalogging it

Sent from my SM-G998U using Tapatalk

 

[Black3vGT]

Curious on how you did your carbon airbag cover? Did you separate trim pieces, finish then glue back on?

 

[crjackson]

Beautiful car man, great work.

 

[teeje]

Curious on how you did your carbon airbag cover? Did you separate trim pieces, finish then glue back on?

Yes I did

Sent from my SM-G998U using Tapatalk

 

[Iceman62]

Sweet steed 'ya built there...awesome machine!

 

[Aerofinz]

VERY nice! I too have an Alloy. After seeing a couple GT500/Super Snake's in Alloy, I've been close to doing the conversion as well in fact the conversion pieces are sitting in my online shopping cart at our local Ford dealer.
I won't hijack your post with pics of mine, but if you haven't seen this Alloy, I thought you might enjoy it!
P.S. I've gone back/forth over the GT500 cowl hood vs the Super Snake. Your cowl looks VERY good!


https://jbaspeedshop.com/p-31196-2009-gt500-super-snake.html

 

[teeje]

VERY nice! I too have an Alloy. After seeing a couple GT500/Super Snake's in Alloy, I've been close to doing the conversion as well in fact the conversion pieces are sitting in my online shopping cart at our local Ford dealer.
I won't hijack your post with pics of mine, but if you haven't seen this Alloy, I thought you might enjoy it!
P.S. I've gone back/forth over the GT500 cowl hood vs the Super Snake. Your cowl looks VERY good!


https://jbaspeedshop.com/p-31196-2009-gt500-super-snake.html

Oh yeah I love that one. I was just looking at that too

Sent from my SM-G998U using Tapatalk

 

[Aerofinz]

It looks like you are in Ohio, are you close enough to plan on attending Mustang Alley this year (extension of Woodward Cruise)? Over 1000 Mustangs expected at a very impressive Ford sponsored event. Bucket list stuff!

 

[teeje]

It looks like you are in Ohio, are you close enough to plan on attending Mustang Alley this year (extension of Woodward Cruise)? Over 1000 Mustangs expected at a very impressive Ford sponsored event. Bucket list stuff!

Oh sweet. I did not know about that. When is it?

Sent from my SM-G998U using Tapatalk

 

[Aerofinz]

Always third Saturday in August. Literally 1.5 million people, 50,000 cars (Woodward Cruise). 8+ lanes wide of bumper to bumper cars covering over 10 miles. Dozens of side shows. Nothing like it. World's largest rolling single day car show. It takes an hour to go a single mile if you choose to drive in it. The municipalities here are bracing for as many as 2 million people due to Covid shuttering much of last year.

Mustang Alley is top notch with dozens of actual Ford Engineers volunteering their day.

Guarantee if you attend you will be back. There is nothing like it. I've attended 10 years of Mustang Alley and 15 years at Woodward Cruise itself.

http://www.woodwarddreamcruise.com/

http://www.ferndaledreamcruise.com/mustang-alley.html (thousands of pics from past Alley's taken by engineers working the events available in link)

 

[Aerofinz]

I actually met the first owner of my Alloy at Mustang Alley in 2008, we hit it off, in 2018 he offered it to me for a deal I couldn't refuse!
It currently has 11,000 miles.

Here it is when he owned it entering Mustang Alley to be displayed, one of the thousands of engineer pics taken over the years (this is probably about 10 years ago).

 

[Aerofinz]

The Blue with white racing stripes is me in 2010 (another Engineer pic from the link albums) getting wet!

 

[Rick Simons]

Sweet! I especially like the blue block and black covers.

 

[Deon Lee]

Nice, I’ve always wanted a KB supercharger going all the way back to my fox days. Plan on switching to one soon from the nitrous. Maybe one day I’ll grow up and have one nice as that lol.

 

[MasterofDisaster]

Sweet ride! Always wanted a KB myself. Sadly, when I go 3/4 throttle in my NA GT, my best beloved starts grabbing the "oh sh!t" handles.

 

[teeje]

Sweet ride! Always wanted a KB myself. Sadly, when I go 3/4 throttle in my NA GT, my best beloved starts grabbing the "oh sh!t" handles.

Just tell her it's a very much needed part to comply with upcoming emissions haha..and kennebells are legal everywhere

Sent from my SM-G998U using Tapatalk