- Joined
- Jan 7, 2013
- Posts
- 306
- Reaction score
- 0
2011 Roush RS3-Stage 3 Mustang Automatic; Gorgeous 10 Second Street Strip Car Build & Tuned by JDM Engineering’s Jim D’Amore; Approved by Jack Roush
This car started its life as a 2011 Mustang GT and was professionally built by Roush Performance and JDM Engineering to be the ultimate Street/Strip Car!! The car was initially built to show off Roush's new products and boy does it do it well. This SHOW-AND-GO car looks as good as it performs!!
No where else will you find a Roush RS3 Mustang that is NMRA Ready. This car can be daily driven, driven to the track then raced with just a simple wheel swap. Then, after you whoop the competition, swap your street wheels on and take it to a meet like it’s no big deal.
Here is a list of parts on the car to give you an idea of the work that was performed on this vehicle.
-Roush RS3 Body Kit & Graphics Install by Roush
-Roush TVS Supercharger w/JDM Engineering 650hp Package
-Ford Racing Mono Blade Throttle Body
-123mm MAF & Air Kit
-S/S Shorty Headers
-Magnaflow Exhaust W/ Roush Tips
-6 point Roll Cage w/ Removable Swing Outs
-3.73 Gears
-60 LB Injectors
-JDM Tranny Catch Can
-Line Lock
-One-Piece Aluminum Driveshaft
-EBC Yellows & Bear Drilled/Slotted rotors
-BMR K-Member
-QA1 Shocks (Included-Not Installed)
-Tail Light Trim Covers
-5 Point Safety Harness
-JDM Custom Drag Springs
-Xcal3 With JDM Tuning
-Bogart Wheel & Tires Front w/ Skinnys (Included-Not Installed)
-Bogart Wheel & Tires Rear Drag Radials 325-50-15 (Included-Not Installed)
-Street Rims & Tires; Hyper Silver TSW 18x9.5 Rivage Wheels (Brand New-No Miles)
Latest Dyno Results Showed 600 RWHP
At 568 RWHP it ran a 10.28@134 -The automatic trans in this car makes it EXTREMELY CONSISTENT
With new HP this RS3 is capability of running 9.99
Asking $40,000.00 For this Amazing Machine Car has around 800 miles on the odometer and is located in Freehold, NJ.
All stickers have been removed from the car. The car looks super clean. I can get more pictures when the weather gets nicer here in NJ. This car is GARAGE KEPT ONLY.
Street Wheels
Current Seats
This car started its life as a 2011 Mustang GT and was professionally built by Roush Performance and JDM Engineering to be the ultimate Street/Strip Car!! The car was initially built to show off Roush's new products and boy does it do it well. This SHOW-AND-GO car looks as good as it performs!!
No where else will you find a Roush RS3 Mustang that is NMRA Ready. This car can be daily driven, driven to the track then raced with just a simple wheel swap. Then, after you whoop the competition, swap your street wheels on and take it to a meet like it’s no big deal.
Here is a list of parts on the car to give you an idea of the work that was performed on this vehicle.
-Roush RS3 Body Kit & Graphics Install by Roush
-Roush TVS Supercharger w/JDM Engineering 650hp Package
-Ford Racing Mono Blade Throttle Body
-123mm MAF & Air Kit
-S/S Shorty Headers
-Magnaflow Exhaust W/ Roush Tips
-6 point Roll Cage w/ Removable Swing Outs
-3.73 Gears
-60 LB Injectors
-JDM Tranny Catch Can
-Line Lock
-One-Piece Aluminum Driveshaft
-EBC Yellows & Bear Drilled/Slotted rotors
-BMR K-Member
-QA1 Shocks (Included-Not Installed)
-Tail Light Trim Covers
-5 Point Safety Harness
-JDM Custom Drag Springs
-Xcal3 With JDM Tuning
-Bogart Wheel & Tires Front w/ Skinnys (Included-Not Installed)
-Bogart Wheel & Tires Rear Drag Radials 325-50-15 (Included-Not Installed)
-Street Rims & Tires; Hyper Silver TSW 18x9.5 Rivage Wheels (Brand New-No Miles)
Latest Dyno Results Showed 600 RWHP
At 568 RWHP it ran a 10.28@134 -The automatic trans in this car makes it EXTREMELY CONSISTENT
With new HP this RS3 is capability of running 9.99
Asking $40,000.00 For this Amazing Machine Car has around 800 miles on the odometer and is located in Freehold, NJ.
All stickers have been removed from the car. The car looks super clean. I can get more pictures when the weather gets nicer here in NJ. This car is GARAGE KEPT ONLY.
Street Wheels
Current Seats
Last edited: