BoostedGt480's Build Thread

iRoush

Roush God
Joined
Aug 27, 2010
Posts
733
Reaction score
1
Location
Fort Lauderdale, FL
All nighters are fun! But not with work the next day. I went to the track the next day. haha!! Kudos to you man! And yea, do it while you're single. Most women don't get it. Unless she's a car girl. Then that means you gotta share the funds for her car. That's no fun. haha!
 

Surfstang2020

Senior Member
Joined
Feb 9, 2010
Posts
5,170
Reaction score
2
Location
Myrtle Beach South Carolina
All nighters are fun! But not with work the next day. I went to the track the next day. haha!! Kudos to you man! And yea, do it while you're single. Most women don't get it. Unless she's a car girl. Then that means you gotta share the funds for her car. That's no fun. haha!

He speaks the truth lol most girls I've dated don't get why I pay so much for parts for the mustang though I am currently talking to a car girl she drives a car from brand x aka the dark side Aka chevy lol trying to get her to switch over I don't know if I could pull an all nighter but you seem psyched to get it done so sweet !


Sent from your moms phone
 

BoostedGT480

Slow 3v
Joined
Dec 5, 2010
Posts
3,076
Reaction score
0
Location
Montgomery, AL
Im somewhat of a youngen...24, but have tons of white hair...damn genes! lol

Uploading pics now. I took just took off work. Couldnt handle it anymore.

P1050895.jpg

P1050896.jpg

P1050898.jpg

P1050899.jpg

P1050900.jpg

P1050901.jpg

P1050902.jpg

P1050903.jpg

P1050904.jpg

P1050905.jpg

P1050906.jpg
 

bmaxwell

BÆST
Joined
Sep 2, 2010
Posts
1,610
Reaction score
0
Location
ATX
Hey at least you're not going bald already lol I am almost 24 and already just about fuckin bald but oh well at least I'm not a bitch. And nice work bro that thing is looking very nice!
 

calispecial08

Senior Member
Joined
Apr 30, 2010
Posts
2,750
Reaction score
0
dang mann! coming together nicely wish i could afford to do something like this right now...
 

BoostedGT480

Slow 3v
Joined
Dec 5, 2010
Posts
3,076
Reaction score
0
Location
Montgomery, AL
Hey at least you're not going bald already lol I am almost 24 and already just about fuckin bald but oh well at least I'm not a bitch. And nice work bro that thing is looking very nice!

well im loosing hair too..lol Right in the corners of my head. what is it called - widows peak?
 

bmaxwell

BÆST
Joined
Sep 2, 2010
Posts
1,610
Reaction score
0
Location
ATX
well im loosing hair too..lol Right in the corners of my head. what is it called - widows peak?

I think a widow's peak is like that little sharp point of hair right in the middle of the forehead like vampires have lol. Anyways yea it sucks
 

BoostedGT480

Slow 3v
Joined
Dec 5, 2010
Posts
3,076
Reaction score
0
Location
Montgomery, AL
Been working on it since I got home. Had to go to lowe's and get hoses for the heat exchanger and everything...

Here are the updates:
- Installed driveshaft
- Installed BMR driveshaft loop (had to be modified to fit my 4" driveshaft because car is lowered. Driveshaft was hitting loop)
- Hooked up wires on alternator
- Hooked up all coolant lines
- Run lines to breather can
- Hooked up oil pressure connection and modified stock inlet to fit in connection for my AEM oil pressure line
- zip tied all loose lines near headers/exhaust
- tightened all fuel rail connections and lines
- checked all grounds and gave the car one last inspection
- took it off the jacks and rolled it into the garage

What needs to be done:
- put clamps on all coolant hoses
- run lines for oil relocation kit
- install intake and accessories
- install battery
- solder BAP wiring connections
- zip tie all loose wires in driver side footwell
- install 8 rib belt
- tighten sc belt
- find bolts and tighten fuel pressure regulator
- install trunk liner and plastic rear liner
- install bumper and lights
- bleed clutch

OH, and to top it off, I got to remove the KB, alt, fuel lines, rails, and manifold. Do you know why? Because Im STUUUUPID! I forgot to hook up the connection in the valley of the block. So, hopefully tomorrow I will be done. It seems like a lot of crap, but most of this is small stuff so hopefully I will start it up tomorrow or Friday. Just worrying myself to death that Im forgetting something so I'm re re re re re rechecking everything
 

tmcolegr

It's All About the Build
Joined
Aug 14, 2007
Posts
3,263
Reaction score
18
Location
Central, FL
I noticed your block does not have knock sensors. I have to assume you already have an updated startup tune...
 
Last edited:

BoostedGT480

Slow 3v
Joined
Dec 5, 2010
Posts
3,076
Reaction score
0
Location
Montgomery, AL
Disappointing night...I didnt get to start it. Spend a lot of time taking off the manifold and KB to plug in the connector in the valley. The 2.6's require you to put rtv silicone around the base so I caught hell scrapping it all off and getting a smooth surface again. So that took alot of time.

Then I routed all my hosed for the supercharger/heat exchanger/sc coolant tank.

Then I had to route all my hoses for my oil relocation kit and breather can.

Then had fun installing my intake with all the new hoses in the front bumper area where the filter is located.

The went to O'Reilys and got a new Red top battery, coolant, water wetter, oil, filter, and random clamps I needed to clamp stuff down.


So with ALL that being said, this is all thats left:
1) Solder BAP wiring
2) Install trunk panels and floor board
3) clean up the wires in driver foot area
4) bleed the clutch/slave
 

psfracer

billy badass
Joined
Apr 6, 2007
Posts
10,917
Reaction score
82
Location
Valencia, CA
So it will be running for sure for the weekend. You are very close now, just take your time and do everything right.
 

BoostedGT480

Slow 3v
Joined
Dec 5, 2010
Posts
3,076
Reaction score
0
Location
Montgomery, AL
So it will be running for sure for the weekend. You are very close now, just take your time and do everything right.

Yea, hopefully tomorrow evening when I get off work. The longest part is going to be soldering the wires and that doesnt take that long..

Trying to figure out exactly how to bleed the clutch. I heard to just lift the driver side up and pump the clutch. But Im not sure how that works
 

bmaxwell

BÆST
Joined
Sep 2, 2010
Posts
1,610
Reaction score
0
Location
ATX
Yep just jack it up on the driver's side and get all the bubbles out. You'll see them coming outta the brake fluid reservoir I believe, and also just pump until the clutch feels solid and normal.
 

BoostedGT480

Slow 3v
Joined
Dec 5, 2010
Posts
3,076
Reaction score
0
Location
Montgomery, AL
She's running!!!!!


and I already had an angry neighbor come storming up the street telling me to cut it off. Said "You have been doing this for the past couple of months"...ahahaha I said, I think your mistaken, this is the first time I have cranked it in almost 6 months...I apologized and continued to back it into the garage...

 
Last edited:

bmaxwell

BÆST
Joined
Sep 2, 2010
Posts
1,610
Reaction score
0
Location
ATX
Congrats!!!! And that neighbor needs to fuck off he doesn't know what it's like obviously
 
Back
Top