Engine Prep for a KB 2.6L SC

[URSOSLO]

12.25 @ 8 PSI, stock tune, stock tires, 93 octane. 60 foot was 1.8 needed a good driver. Have a 10 lbs pully coming and will put in the "hot" tune from KB with the 100 octane, should be in the 11's.

 

[marcspaz]

Looks like someone gonna through the glove!!! I hear a challange coming. I call dibbs on ticket rights! LOL

 

[thump_rrr]

My 10 psi 93 octane street tune numbers are in my sig.

BTW I only have a street tune.

Nuff said.

BTW Don't take us too seriously we like to bring the newbies back to reality.

Rule #1 There is always someone faster.

I'm one of the slow ones around here.

 

[URSOSLO]

My 10 psi 93 octane street tune numbers are in my sig.

BTW I only have a street tune.

Nuff said.

BTW Don't take us too seriously we like to bring the newbies back to reality.

Rule #1 There is always someone faster.

I'm one of the slow ones around here.

When I run the 10 PSI I'll let you know what it runs.

Never said I was the fastest just said I never met a Saleen I did not beat.


I'm one of the slow ones also!

 

[don_w]

I've only been beaten by one Saleen, and that one was a full-time R&D shop car, with a stroker motor, designed solely for racing on the circuit. But there are a few KB and Whipple average-Joe-type daily drivers that have beat me.

 

[thump_rrr]

I've only been beaten by one Saleen, and that one was a full-time R&D shop car, with a stroker motor, designed solely for racing on the circuit. But there are a few KB and Whipple average-Joe-type daily drivers that have beat me.

Let's not forget that your car isn't exactly all bolt ons either.

 

[don_w]

Let's not forget that your car isn't exactly all bolt ons either.

The only things that weren't "bolted" on are the roll bar and the LCA relocation brackets. They were welded on...

Bottom line, it's still a 100% daily driver that has never been trailered to a track... and with zero sponsorship. It's just a fun street car... not a race car.

 

[silverpoison]

I've only been beaten by one Saleen, and that one was a full-time R&D shop car, with a stroker motor, designed solely for racing on the circuit. But there are a few KB and Whipple average-Joe-type daily drivers that have beat me.

Don, was this a blue saleen with stripes built at DMP???

 

[don_w]

Don, was this a blue saleen with stripes built at DMP???

No, it was JDM's car at FFW Fontana last year.

 

[URSOSLO]

No, it was JDM's car at FFW Fontana last year.

Not your typical daily driver! LOL

 

[94tbird]

bah my car runs 11.8s. ill bet if you put a good driver behind the wheel (obviously not me haha) and the car will see 11.5's or thereabouts.

 

[URSOSLO]

I feel your pain! LOL

 

[pcdrj]

Have not been beat by a Saleen yet! And yes I have raced a few!

Yes but did they race you?

 

[Hawgman]

ill bet if you put a good driver behind the wheel (obviously not me haha) and the car will see 11.5's or thereabouts.

I have always said the best mod my car could ever get would be a driver mod

 

[Cali HP Addict]

Where are the Turbo guys? They usually jump in by now.

 

[Herknav]

I have always said the best mod my car could ever get would be a driver mod

I'm looking for that mod for mine as well...

 

[marcspaz]

Herknav, I like the motto in your sig. Unfortunately, we are all prisioners of our own device.

Did you go to UTK.

 

[Herknav]

I did, nice catch!

 

[marcspaz]

Cool, I have a family member that took nursing there. Good school. I had fun hanging out when I visited. Good group of people...

 

[MikeVistaBlue06]

Question and back on topic...


Will such cams as shown in the video work with FI engines?

If so, how about with an automatic transmission?

Man oh man I do like the way that booger sounds at idle!

Mike