Fore Precision 3v Fuel Rails Look inside~ Ideas!!

[ModifyMyStang.com]

Ok just got off the phone with Stacy @ Fore, and if I can pre-order 5 sets of Rails we can get them engraved for $10.00 each extra...

Must be the same engraving on each.

Black-195 shipped with engraving.

Post up some ideas- Supercharged, Turbocharged, etc

Lmk

 

[Hawgman]

So she is going to have them made with no engraving? Because they already say "Fore" on them (probably about 3 or 4 inches long by an inch and a half or so tall)

 

[ModifyMyStang.com]

no, we can order 5 with something else on them. LMK

 

[STACYSTANGZ]

Yes, the Fore can be removed if you would like. The Fore logo is on the sides (not middle) and anodized over top so either way.. Once we anodize, we will then add the logo of your choice to make it seen.

Pick the logo you guys want and WE can do it as long as there are five sets.

Thanks for your support!

 

[Hawgman]

I already have a set, but this is very cool

 

[STACYSTANGZ]

 

[Miracle]

Stacy, will you guys' fuel rails work with a KB 2.6 H?

 

[STACYSTANGZ]

Stacy, will you guys' fuel rails work with a KB 2.6 H?

ONLY on the 3v, it seems that no one's fuel rails fit the Kenne Bell superchargers without a lot of modification.

With Fore Precision's design, we tried to incorporate their superchargers, but were unable to do so with all the modification to their product as well.

Let me know if you have any other questions.

 

[Miracle]

ONLY on the 3v, it seems that no one's fuel rails fit the Kenne Bell superchargers without a lot of modification.

With Fore Precision's design, we tried to incorporate their superchargers, but were unable to do so with all the modification to their product as well.

Let me know if you have any other questions.

So I have heard... you just confirmed it.

Dammit.

 

[STACYSTANGZ]

So I have heard... you just confirmed it.

Dammit.

I will be sure to let you know if anything changes though.

 

[cruisin]

What is the current design, I wouldnt be against ditching my current rails for some anodized ones with some engraving that flow a lot better.

What are the plans for the engraving?

 

[STACYSTANGZ]

I dont believe anyone has came up with a logo yet for the set of 5! Got any ideas?

 

[ModifyMyStang.com]

What is the current design, I wouldnt be against ditching my current rails for some anodized ones with some engraving that flow a lot better.

What are the plans for the engraving?

The current design is The Fore logo is on the sides. I'm thinking the clear anodized are in stock ready to ship. Let me know if intersted.

 

[cruisin]

Well when you get a group of people to get rails, I may take a set, just depends on the engraving. Saleen? 302? any of those?

 

[ModifyMyStang.com]

Ok will keep you posted! Maybe S197 engraved? throw out some ideas!

 

[94tbird]

I believe the Metco fuel rails are the ones i use with my KB 2.6H and required only small modifications to work. The key is not using a cross over fuel line and fueling each line individually, and relocating the mounting tabs

 

[STACYSTANGZ]

You can shave any aftermarket rails to fit, but it is a lot of modification on any KB app on only the s197. It seems only stock ones are capable of fitting without modifications....
Fore Precision does not have mounting tabs on the s197, they are FULL BILLET CNC MACHINED to perfection.

 

[usafimj]

How about putting "ALL MOTOR" for you N/A guys or something along those lines

 

[94tbird]

You can shave any aftermarket rails to fit, but it is a lot of modification on any KB app on only the s197. It seems only stock ones are capable of fitting without modifications....
Fore Precision does not have mounting tabs on the s197, they are FULL BILLET CNC MACHINED to perfection.

there wasnt that much modification

 

[STACYSTANGZ]

Got any pics?