has anyone tried m&h tires

[LTHLCHRG]

Just wondering if they work as good as et streets

 

[Hawgman]

There are quite a few threads on here readily available via this link that discuss M&H tires

 

[mikeysgt]

^+1 and yes... better

 

[Kipp07GT]

Run them here and some damn good tires. hooks really good and drive on the street really good.

 

[psfracer]

Don't use them---I could only muster a 1.412 60' time with the 325's and the front tires would only lift a few inches off the ground after driving on them for 174 miles to the track (Barona) and 84 miles to (Fontana).

Yes, they are very good tires.

 

[Kipp07GT]

Is that all Paul, A few inches, you sure that wasnt from the hydraulics on the car Ahahah, M&H tires a great. I also run 325's on mine and by far the best drag radials ive ever ran.

 

[psfracer]

Oh yeah, and the sidewalls are way too stiff, they don't wrinkle at all.....

That was at 15 psi cold (I am estimating probably 17 psi after coming out of the burnout box). Once again, I don't think you could go wrong either way (M/T or M&H), but I can definitely vouch for the M&H's working.

 

[marcspaz]

I don't have as much power as Paul, so I can't lift the front-end. :-(

I do leave the line at WOT, bouncing off the rev limiter at 7000 RPM's, and dumping the clutch. I could only muster a 1.7 60' time with 332 rwhp on a stick car that weighed 4000 lbs. Also at 15 PSI cold.

 

[Timbostang]

My little 275/50/17 M&Hs are hooking good enough to blow through my stock clutch in the first three gears. I also did a 25mph roll race a couple of weeks ago on the street and when I brake boosted the Nittos on front started to slide and the M&Hs never broke traction.

 

[TexasKyle]

That is an awesome pic right there.

Oh yeah, and the sidewalls are way too stiff, they don't wrinkle at all.....

That was at 15 psi cold (I am estimating probably 17 psi after coming out of the burnout box). Once again, I don't think you could go wrong either way (M/T or M&H), but I can definitely vouch for the M&H's working.

 

[mikeysgt]

i've managed consistant 1.55 60's on my 275/50/17s on the stock 17's launching off the nitrous. hoping this friday with the new big and littles i can shave a little bit more off that 60'.

 

[mikeysgt]

just got home from m/h and john has 1 set of 325/45/17's in stock, and 4 sets of the 275/50/17s if anyone is interested...

 

[MikeyBlacks]

Mikey , u get to the track yet w/your new wheels yet ?

 

[mikeysgt]

Not yet... 15 hrs and ill finally get to try them out! I can't wait.