Installing a paxton novi 2200.

[Wnt2gofst]

So guys, do you think I can hit my 700rwhp goal safely on the 3.1 pulley ?

Keyword is safely I popped a motor too lol..

I'm getting it tuned soon. Will probably be going with Lund.

Your on a built engine now right? You can make 700 whp with out the 3.1. Pushing a stock block to 700whp is never safe.

 

[Wnt2gofst]

Thank you, anything extra that I need to purchase with that gauge?

Also are you on your stock motor?

I don't run no boost gauge. Only checked it on dyno. But thats me. I am also on the stock motor. But I push my car hard. Others have popped doing and trying to do what my car has done.

http://www.youtube.com/watch?v=tX3qi3Ib4_4

 

[QTR]

Your on a built engine now right? You can make 700 whp with out the 3.1. Pushing a stock block to 700whp is never safe.

Built engine yes. L&M spec diamond pistons 9.5 compression, Manley H Beam rods w/ ARP2000 and total seal rings.

I'm using the 3.1 because of the lowered compression, Terry said I should be close to 700 with that pulley. I've been advised to lower the compression since I can't get E85 and will be on 93 octane the whole time.

 

[Wnt2gofst]

Built engine yes. L&M spec diamond pistons 9.5 compression, Manley H Beam rods w/ ARP2000 and total seal rings.

I'm using the 3.1 because of the lowered compression, Terry said I should be close to 700 with that pulley. I've been advised to lower the compression since I can't get E85 and will be on 93 octane the whole time.

Yes with lowered compression should be around 700. Throw race gas in it and drop a couple more pulleys.

Just Another 700whp DD 5.0

 

[bhowardb]

I joined

My car is officially part of the 2200 class.

 

[Bullett]

Nice! Correct me of I'm wrong but I remember reading that u can run the bov without the filter? What are the pros and cons? Car is my dd btw.

 

[bhowardb]

Nice! Correct me of I'm wrong but I remember reading that u can run the bov without the filter? What are the pros and cons? Car is my dd btw.

People are running without the filter, but it was designed for use with one so I will keep the filter on mine.

 

[Wnt2gofst]

My car is officially part of the 2200 class.

Congrats, now you need to black it out

 

[bhowardb]

Congrats, now you need to black it out

I think I'm going to do a certain color scheme under the hood so I'm not sure about black on the blower.

 

[gizmo5]

Nice! Correct me of I'm wrong but I remember reading that u can run the bov without the filter? What are the pros and cons? Car is my dd btw.

With or without filter. Either way will do. It won't hurt it without, and I even advise changing the valve to a bigger one as I think the kit is undervalved from the start. They skimped on it to save money and make the kit cheaper.

 

[Bullett]

With or without filter. Either way will do. It won't hurt it without, and I even advise changing the valve to a bigger one as I think the kit is undervalved from the start. They skimped on it to save money and make the kit cheaper.

What would you recommend switching to?

 

[DSargent09]

What are the pros and cons to changing the BOV.

 

[gizmo5]

I highly recommend the TiAL Q valve with the supercharger spring. The valve that comes in the kit is too small and flutters. Fluttering may sound cool to some, but with each flutter is pressure on the turbine in the blower, which is bad joojoo.

 

[Bullett]

is it a direct bolt on?

 

[gizmo5]

Stock Paxton kit valve, flutter



Replaced it with a TiAL Q valve, no flutter, plus badassery points




More info in my build thread, page 38. Click my sig link

 

[DSargent09]

Where to buy?

 

[gizmo5]

Where to buy?

I ordered it from himni. They have the adapter to go with it. BUT, I highly suggest you call the order in and do it over the phone.

 

[Bullett]

What spring do we specify? Just say blower spring?

 

[DSargent09]

I ordered it from himni. They have the adapter to go with it. BUT, I highly suggest you call the order in and do it over the phone.

How long did it take to come in? Also how much did it cost?

 

[onebadgsx]

http://www.atpturbo.com/mm5/merchan...tp&Product_Code=TIL-BOV-007&Category_Code=BOV

order from here, you can select the greddy flange for a direct bolt on and select the 2-3 psi supercharger spring from the drop down menu and the cheapest i found.

tial q is the way to go though, by far the best valve on the market and i sounds badass. but it is LOUD....