Installing a paxton novi 2200.

[5PointOHNO]

Attention attention:

This is a Paxton 2200SL thread for all future and current 2200SL owners... Aka Gods of 5.0 land.

4.0 whipped, YSIs, gay donkey shows, how to fly planes, what color is your bathroom, and why doesn't my mommy love me belongs in a different thread.


RANT [ ]on [X]off

V3Si owner checking in...

I make Paxton power, so, I'm sorta kinda maybe in the club.

 

[konablue11gt]

PFFFT Paxton is Vortech ...Vortech is Paxton

 

[gizmo5]

PFFFT Paxton is Vortech ...Vortech is Paxton

 

[Kenaizer]

PFFFT Paxton is Vortech ...Vortech is Paxton

You're right.

3.7s and 5.0s are both Mustangs too.

 

[Wnt2gofst]

I mean after all whipple and kb are both pd blowers.

from my S4 in your sisters bed

 

[Seer]

I mean after all whipple and kb are both pd blowers.

from my S4 in your sisters bed

Rotor designs are.different. .completely different companies.

Vortech owns.paxton

 

[Wnt2gofst]

Rotor designs are.different. .completely different companies.

Vortech owns.paxton

Both are pd blowers...

from my S4 in your sisters bed

 

[Seer]

Both are pd blowers...

from my S4 in your sisters bed

owned by two different companies and different designs. Yours is essentially badge engineering.

 

[QTR]

If you guys have any offers PM me. I'm legit and have trader ratings in another forum and ebay, can provide proof. I have LOTS of parts for sale, hit me up for a deal.


Sent from my iPhone 5 using Tapatalk

 

[Wnt2gofst]

Some getting built cars back..others getting ready to take to shop.

from my S4 in your sisters bed

 

[D98GT]

I'm still looking at mine sitting in the corner of the room

 

[Kenaizer]

I'm still looking at mine sitting in the corner of the room

Yeah, when are you thinking of installing it?

 

[Wnt2gofst]

I'm still looking at mine sitting in the corner of the room

Im talking to beef now about my short block build.

from my S4 in your sisters bed

 

[cyclerick]

Im talking to beef now about my short block build.

Let us know what you go with and from whom

 

[DSargent09]

Just for curiosity sake. What does it cost to have lets say a forged rotating assembly installed. Parts and labor. If you build before you blow.

 

[Wnt2gofst]

Just for curiosity sake. What does it cost to have lets say a forged rotating assembly installed. Parts and labor. If you build before you blow.

With all new parts/block etc seams short block is 5k-ish plus roughly 3-4k in labor.

from my S4 in your sisters bed

 

[Mystickeith50]

With all new parts/block etc seams short block is 5k-ish plus roughly 3-4k in labor.

from my S4 in your sisters bed

Yup

 

[DSargent09]

Damn thats expensive! I wont be going forged until it blows. Planning to finally install my paxton not this weekend but the following. I had to fix up the DD first lol. AC is a must in Texas

 

[Paul.]

With all new parts/block etc seams short block is 5k-ish plus roughly 3-4k in labor.

For that much coin, wouldn't that only make an Aluminator make even more sense? Then you can sell your old motor, and install the new one yourself since it's pretty straightforward to install a complete motor.

Paul.

 

[TW1NTRB0]

With all new parts/block etc seams short block is 5k-ish plus roughly 3-4k in labor.

from my S4 in your sisters bed

That's called getting raped. There is no way it takes 30 - 40 hours @ $100/hr to throw the top end on a fresh short block, install the new engine, and reinstall the supercharger. I've personally seen a built 4V and Procharger be installed in less than 4 hours, think it was 3 hours in all reality. Around here this job is in the $1500 - $2K range. $5K - $6500 is right on for a stout bottom end though. Depending on how "stout" you want that bottom end and if your block is still usable, you can be out the door for less than $6500 installed.