Official boss block build

[GB10]

Is he planning on lateral or vertical gas ports? You don't really need gas ports for what you are doing. The extra pressure from the gas pushing on the ring to keep it sealed will wear the rings and your bore quicker. If you just plan to race your car it will be fine, but if you plan on street driving it then I would tell him you don't want gas ports. You won't be making enough power to see any benefit from gas ports imo. Get a good set of rings with a steel top ring and you will be fine.

 

[Dillon Dollar]

Id had the car since 05 and still hasn't hit 40 k miles and I plan on turning 8k rpm and be in the 1000+ range

Sent from my SPH-L900 using Tapatalk

 

[Dillon Dollar]

My builder also does not like the eagle crank and rods he thinks it will come apart at anything over 800. Can anyone shed any light on this

Sent from my SPH-L900 using Tapatalk

 

[TurboX]

Ive heard same thing, as Bruce has asked about the valves has anybody seen them fail ? I once did some searching and though people were only dogging on them because they are Chinese forged(Thats what I read).

Just cause something comes from China doesn't automatically make it shit, it up the the person paying the Chinese company to maintain/keep eye on quality.

 

[Dillon Dollar]

Back in the day eagle claimed the stuff was good to 1400

Sent from my SPH-L900 using Tapatalk

 

[GB10]

I don't necessarily think the crank will break, but there is a good chance it either won't be straight or it will have some journals that are out of round. At least from my experience anyways. Also, if you plan to turn 8k rpm I would spend the money on bullet I-beam rods that come with 7/16" rod bolts instead of 3/8" like the h beams. Clamp load is almost double with the larger rod bolts.

 

[Dillon Dollar]

Eagle assured me today that the crank and rods have both seen over 1200 so I guess I won't worry about it

Sent from my SPH-L900 using Tapatalk

 

[Makdaddy]

What Pistons? [FONT=&quot]4032 or 2618
And I would think 8K would be pushing stock Valve train


[/FONT]

 

[Dillon Dollar]

2618. Ill have jesel stuff in it with good springs and I think stainless valves

Sent from my SPH-L900 using Tapatalk

 

[Makdaddy]

2618. Ill have jesel stuff in it with good springs and I think stainless valves

Sent from my SPH-L900 using Tapatalk

Shit you are building Full out race car

 

[Dillon Dollar]

Lol I need power

Sent from my SPH-L900 using Tapatalk

 

[Timmbo]

Lol I need power

Sent from my SPH-L900 using Tapatalk

Did your turbos ever show up?

 

[Bobby]

They were sent out tuesday should have them by today.

 

[Dillon Dollar]

Yupp they arrived this morning

Sent from my SPH-L900 using Tapatalk

 

[Saleen S281]

Subd... Turbo Pics!

 

[NaS197]

I'm thinking twin turbo's in my '06. I gotta see this

Sent from my EVO using Tapatalk

 

[Bobby]

Check in our section. Its our new twin kit.

 

[Dillon Dollar]

Twin turbo ftw. And these babies are nice

Sent from my SPH-L900 using Tapatalk

 

[Department Of Boost]

I plan on turning 8k rpm

I'm pretty sure the stock ECU won't go past 7800rpm.

 

[Dillon Dollar]

Iv since changed those plans going to set rpm too 7400 and shift between 6800 and 7k. Builder don't like the idea of turning it that high with a stroker kit. He tried to get me to go back with a factory stroke and I wouldn't do it

Sent from my SPH-L900 using Tapatalk