on3 6 weeks back order for 3v

[onequicktang]

and they dont offer the master power 70mm anymore, but this thursday they are introducing some cermaic bearing turbos of there own I believe is what he said.

 

[Bobby]

yes this is true i am a dealer for them and i talked to chad the owner and he said they are making pretty good numbers with them.

 

[dkingfrank214]

What type of numbers?

 

[Bobby]

i believer it is a .81 instead of the .68 and it spools up about the same and picked up about 50 hp or so. but i am not sure.

 

[Alfiedagr8]

U can always get a boost brother kit. It's a good kit also

 

[Bobby]

i havent seen any one with that kit or even used that kit like i have the on 3 kit. i know it is a good kit.

 

[rxpwhistler1]

Boost Brothers

I tried to go to their site to check out their headers but their site appears to be down....can't really get an idea of their kits when you can't even look them up, other than forum threads..

 

[Bobby]

here is there link. it works for me. http://on3performance.com/mustanggt3v.html the best thing to do is talk to a dealer and tell them what you want and they can talk to them to get the best deals for you.

 

[onequicktang]

im not wanting to wait 6 weeks. I might go with the boost brothers minus the turbo and can some changes to the kit.

 

[Bobby]

hope it fits ok. i just checked and some people have had problems making them fit right. good luck to you.

 

[onequicktang]

im looking at the twin garrette wince they offer a full system now. just dont no much about them and im looking for 650+ rwhp

 

[johnnyv8]

I guess I'm lucky, i just got got a used on3 turbo kit w/ everything I need to install from the classified section here for under $1700!

 

[19COBRA93]

hope it fits ok. i just checked and some people have had problems making them fit right. good luck to you.

The same can be said for just about any turbo kit.

I ran a THP twin kit on my '03 Cobra. It was expensive and supposed to be top of the line... It fit like shit.

 

[Alfiedagr8]

I have an on3 kit and did get it to line up but it was a pain in the ass. Also if u get the boost brother kit it fits only 5spd only. It's a knock off turbonectic kit same pipes and bends. Just not name brand stuff and they use v clamps. Other than that get the instruction Manuel from turbonectic website. I just installed a kit on my friends auto and had to get some of the pipes redone at my friends shop. But if ur car is a 5 speed u will be fine Here are some pix. I'm still not done with it jut need to wire up the maf harness and wideband and tune it.

 

[JeremyH]

U can always get a boost brother kit. It's a good kit also

No, no its not. Its the defienitiopn of a shitty cheap kit. Alot more tubing with cats before the turbo... that alone is a no no, really bad maf placement that makes tuning a nightmare(ask Lito) all parts are cheap knockoffs. And its boost brothers, their reputation is right up there with rpm outlet and mmr..

 

[rford426]

No, no its not. Its the defienitiopn of a shitty cheap kit. Alot more tubing with cats before the turbo... thats alone is a no no, really bad maf placement that makes tuning a nightmare(ask Lito) all parts are cheap knockoffs. And its boost brothers, their reputation is right up there with rpm outlet and mmr..

If it fits like there longtubes I'd run away very far away

 

[JeremyH]

If it fits like there longtubes I'd run away very far away

ANother good point as well.

 

[Alfiedagr8]

What's wrong with rpm outlet and mmr? Never heard anything bad from them? But then again I never really did business with them? And we shall see when I'm done. How the kit holds up and works.

 

[Greg Hazlett]

Really? Wow...

Do a search on here and you will educate yourself in a hurry!

 

[dysan]

That's the thing...you won't hear anything bad from them, just about them! The more time you spend on here you'll see "Fuck MMR" in alot of people's sigs.