Post your best 1/4 MILE ETs here!

[Turbolvr321]

My first time ever taking any car down the track... Car doesnt have much done to it, intake, exhaust, H pipe (no cats), 4.10s. Thats it. 5 spd. Want better times! Need a tune first...

r/t ... .5275
60' ... 2.1071
330 ... 5.9508
1/8 ... 9.0674
mph ... 79.91
1000 ... 11.7205
1/4 ... 13.9592
mph ... 101.12

Video (Right lane, fog lights on only):
http://www.youtube.com/watch?v=eQyqK9M6G80

 

[Chris B.]

[email protected] in a stock 2008 GT

Here is the timeslip for the 13.573 and another run within 2%. I'm car number 6937.

Stock 2008 Mustang GT manual transmission.
281 cid
5 speed manual 3650 transmission
N/A no power adder
stock factory optional 3.55 rear gears
stock BFG KDWS 235/50-18 tires

 

[psfracer]

Update sent to big boss 09-02-09

 

[don_w]

Update sent to big boss 09-02-09

'Tis posted.

 

[timfoster405]

Please add me to the Official ET List for this forum

1) Timesheets are attached below
2) The following vehicle information:
- 281 Cubic Inch (totally stock engine except for blower)
- Edelbrock E-Force Supercharger, TVS 2300 cc
- 9.5 lbs max (450 rwhp SAE)
- Stock 3.31's w/ 100% stock suspension
- Mickey Thompson Drag Radials, 265-40-18 on stock bullitts
3) Three runs that night (11.658 & 11.705), within .4% which is less than 2%.

 

[chad05gt]

1) Timesheets are attached below
2) The following vehicle information:
- 281 Cubic Inch (totally stock engine except for blower)
- Edelbrock E-Force Supercharger, TVS 2300 cc
- 9.5 lbs max (450 rwhp SAE)
- Stock 3.31's w/ 100% stock suspension
- Mickey Thompson Drag Radials, 265-40-18 on stock bullitts
3) Three runs that night (11.658 & 11.705), within .4% which is less than 2%.

... great runs though

 

[hoovsgt]

shm rotating assembly,comp cams,t76 turbo,4.10 gears,bogart rims,m/t slicks.web site is www.hoovsgt.com..best so far is
5-22-09 VMP
R/T 0.178
60ft 1.809
330ft 4.668
1/8 mile 6.975
MPH 106.56
1000ft 8.968
1/4 mile 10.667
MPH 131.81

 

[hoovsgt]

sorry cant type well www.hoovsgt.com has video of drag races

 

[ILW84U]

Well I finally broke into the 11's. DA was great for here. About 2800'. Even with a crappy torque converter that makes it look like Granny is leaving the lights! Can't wait to see what it will do with about a 3500 stall.

60' 2.011
330 5.193
1/8 7.682 @ 98.55
1000 9.868
1/4 11.708 @ 125.73

 

[stkjock]

Well I finally broke into the 11's. DA was great for here. About 2800'. Even with a crappy torque converter that makes it look like Granny is leaving the lights! Can't wait to see what it will do with about a 3500 stall.

60' 2.011
330 5.193
1/8 7.682 @ 98.55
1000 9.868
1/4 11.708 @ 125.73

nice times man. 125+ trap your car is moving nicely!! you'll be low 11s with that stall and a good tire (if you dont have one now)

 

[marcspaz]

Well I finally broke into the 11's. DA was great for here. About 2800'. Even with a crappy torque converter that makes it look like Granny is leaving the lights! Can't wait to see what it will do with about a 3500 stall.

60' 2.011
330 5.193
1/8 7.682 @ 98.55
1000 9.868
1/4 11.708 @ 125.73

Sweet! Nice numbers...

 

[ILW84U]

nice times man. 125+ trap your car is moving nicely!! you'll be low 11s with that stall and a good tire (if you dont have one now)

I just ordered a 3500 stall from PI today. I just hope the snow holds off here long enough for me to get it installed & try it! Running on MT Street radials 295/45/17 for now.

 

[prinzzz]

298ci,whipple/12.5lbs, stock tremec, 4.10s

 

[paypay2345]

Long tubes off road X C&L Cold air Tune and nitto's 20" Drag radial 12.98 111MPH

 

[GT RO]

New personal best

Ran a new best ET over the weekend, even though traction was limited. I believe this will bump us up in the ranks. Hope the video is enough as we dont have a scanner or a way to show the slip, Thanks GT RO
http://www.youtube.com/watch?v=Q_WQpLR8h4I&feature=channel_page

60' - 1.534
330- 4.095
1/8 - 6.222
MPH- 115.47
1000'- 8.070
1/4- 9.660
MPH - 140.40

 

[US-1]

Scanners aren't sold in Canada??????

 

[GT RO]

Scanners aren't sold in Canada??????

yes I believe they sell scanners in Canada,believe it or not there is life north of the border.Infact I believe that the fastest privately owned factory computer 3 valve car comes from here . ( i figured that was a little more important than the scanner LOL)

 

[psfracer]

Ran a new best ET over the weekend, even though traction was limited. I believe this will bump us up in the ranks. Hope the video is enough as we dont have a scanner or a way to show the slip, Thanks GT RO
http://www.youtube.com/watch?v=Q_WQpLR8h4I&feature=channel_page

60' - 1.534
330- 4.095
1/8 - 6.222
MPH- 115.47
1000'- 8.070
1/4- 9.660
MPH - 140.40

Since this happened in Canada I have to DQ you.

 

[US-1]

In fact I believe that the fastest privately owned factory computer 3 valve car comes from here .

Del Pino might have something to say about that.

 

[psfracer]

Ok, just kidding of course.

The video clearly shows the ET so its good enough for me. I will update. Good job.