Post your best 1/4 MILE ETs here!

Status
Not open for further replies.

psfracer

billy badass
Joined
Apr 6, 2007
Posts
10,917
Reaction score
82
Location
Valencia, CA
How about everyone just updates their sigs, then I could go through and update the sheet in about an hour. Some already have the info in their sigs and that would make it much easier.

I think I am going to add a lbs boost column, and get rid of the car column (because everyone has a s197 mustang--do we really care if its a 05-06-07-08)? No. I will also add a rear gear column. I was thinking about adding a weight column but not many people ACTUALLY KNOW how much their car weighs--plenty would guess but that info would be meaningless in my opinion. I will add a RWHP/RWTQ column however. While we could ask for a dyno sheet, I don't think it would be that necessary as if you had 800rwhp and ran a 12, that would be embarrassing.

My thought on the boost category---is rather then using the pulley size, which could yield a different amount of boost depending on the engine combination, is just list the lbs of boost. But this will only be as accurate as the people reporting, and I will have no way to verify.
 
Last edited:

psfracer

billy badass
Joined
Apr 6, 2007
Posts
10,917
Reaction score
82
Location
Valencia, CA
Starting 9/14/2008

Starting 9/14/2008 Please post the following with your timeslip / video:

Rwhp/rwtq
Engine cid
Trans
Poweradder
Size
Boost/shot
Gear
Tire

Example: 2,435 rwhp-1,950 rwtq / 331 cid / powerglide / turbo / twin 91 mm / 35 lbs / 3.31 / 30X16X16 Goodyear slicks

No need to do so if your SIG has all of the information. If you have already posted a slip, please update if you can---easiest way is to update your sig but you can post here as well.
 
Last edited:

scramblr

Senior Member
Joined
Jun 27, 2007
Posts
4,812
Reaction score
136
Location
New Braunfels, Texas
Rwhp/rwtq - ? (No Dyno...Ditto to what Don said below)
Engine cid - 281
Trans - 3650
Poweradder - Saleen
Size -
Boost - 8
Gear - 3.55
Tire - M/T ET Street 275/40 17
 
Last edited:

don_w

Dyno Numbers - Who Cares?
Joined
Apr 4, 2007
Posts
9,999
Reaction score
103
Location
San Diego, CA
For my 2-year old (and soon to be replaced) 1/4-mile time:

Rwhp/rwtq - Don't give a shit... completely irrelevant to track times.
Engine cid - 281
Trans - 5R55S
Poweradder - Kenne Bell
Size - 2.4L
Boost/shot - 12psi
Gear - 4.10
Tire - 28x10.50-15 M/T slick
 

JimC

Senior Member
Joined
May 5, 2007
Posts
2,339
Reaction score
720
Update for my slip:
Rwhp/rwtq: 251/330
Engine cid: 245 (4.0L)
Trans: Automatic
Poweradder: Zex system
Size
Boost/shot: 75
Gear: 3.73
Tire: Mickey Thompson ET Street radial, 255-50x16
 

psfracer

billy badass
Joined
Apr 6, 2007
Posts
10,917
Reaction score
82
Location
Valencia, CA
For my 2-year old (and soon to be replaced) 1/4-mile time:

Rwhp/rwtq - 12,001,578/12,001,630
Engine cid - 281
Trans - 5R55S
Poweradder - Kenne Bell
Size - 2.4L
Boost/shot - 12psi
Gear - 4.10
Tire - 28x10.50-15 M/T slick

Fixed.

Actually the rwhp column is really to see who is doing more with less, and vice versa. So if I post 450rwhp, but I am turning 11.20's, that shows I am actually putting it to the ground, and people can look at the combo I am using that works. Thats the idea anyway.
 

don_w

Dyno Numbers - Who Cares?
Joined
Apr 4, 2007
Posts
9,999
Reaction score
103
Location
San Diego, CA
Fixed.

Actually the rwhp column is really to see who is doing more with less, and vice versa. So if I post 450rwhp, but I am turning 11.20's, that shows I am actually putting it to the ground, and people can look at the combo I am using that works. Thats the idea anyway.
It still doesn't mean anything. No matter how you slice it or dice it, it's still just a peak number that occurs only at one specific rpm in 4th gear. And most cars won't even hit that rpm in 4th gear during a run.
 

GTMackattack

Junior Member
Joined
Aug 21, 2008
Posts
13
Reaction score
0
Location
NJ
573rwhp/? rwtq. sorry dont have my dyno slip and forgot the exact #
JDM 298ci Stroker
Stock Auto Trans
Saleen S/C
2.3L
15psi
4:30's
M/T E/T street radial
 

Attachments

  • Time Slip.jpg
    Time Slip.jpg
    313.4 KB · Views: 19

Hitman

Banned
Joined
Feb 7, 2008
Posts
1,311
Reaction score
11
Location
Tennessee
1/8 - 8.30 @ 86 mph - 1.79 60 ft.

1/4 - 12.73 @ 109 mph - 1.81 60 ft.

that was with the Draglite XP wheels with 275/50/15 M/T's and bypassing the power steering.

rwhp - I'd say somewhere between 295-305
cid - 281
3650
4.10
 
Last edited:

psfracer

billy badass
Joined
Apr 6, 2007
Posts
10,917
Reaction score
82
Location
Valencia, CA
573rwhp/? rwtq. sorry dont have my dyno slip and forgot the exact #
JDM 298ci Stroker
Stock Auto Trans
Saleen S/C
2.3L
15psi
4:30's
M/T E/T street radial

Haha you made it! Your car has been one of my favorites for over a year now. Glad to see you here!
 

GTMackattack

Junior Member
Joined
Aug 21, 2008
Posts
13
Reaction score
0
Location
NJ
Haha you made it! Your car has been one of my favorites for over a year now. Glad to see you here!

Yea its about damn time i made it over here haha. Figured id start off trying to get on the ET list....... whats up everybody :beer:
 

Bubbamax

Member
Joined
Jun 4, 2007
Posts
100
Reaction score
0
Location
Montreal, Canada
Rwhp/rwtq same as Don_W's comment
Engine cid 281
Trans 3650
Poweradder N2O
Size
Boost/shot 125 HP
Gear 3.90
Tire Hoosier 26x10.5

There you go as requested....
Big many thanks also for the work trying to keep the list up to date..... Thumbs-up !!
 
Last edited:

Fastmover

Senior Member
Joined
Apr 18, 2007
Posts
1,346
Reaction score
5
Location
MD
1.599 60
4.654 330
7.188 1/8
96.94 MPH
9.390 1000
11.230 1/4
119.35 mph

Don update me!
 

05mustang_TT_charged

Because Race Car!!
Joined
Nov 2, 2007
Posts
2,355
Reaction score
5
Location
LSU Country
Rwhp-613/rwtq-534
Engine cid-302
Trans-TR3650
Poweradder-Kenne Bell
Size-2.6H
Boost/shot-15 psi.
Gear-3.90
Tire-305/45/18 Nitto Drag Radial
 

racevert

ZKiller
Joined
Aug 13, 2007
Posts
304
Reaction score
1
Location
Illinois
Updated times
Rwhp/rwtq - not sur now
Engine cid 281
Trans 5R55S Level 10
Poweradder twin-screw
Size 2.4
Boost/shot 12 PSI
Gear 3.73
Tire Hoosier 26x11x`7 MT 3743
1/8 1/4
7.285 11.426
95.04 118.92

Moves me back in to top 25!
 

Attachments

  • 11.42.JPG
    11.42.JPG
    91 KB · Views: 2
Last edited:

Fastmover

Senior Member
Joined
Apr 18, 2007
Posts
1,346
Reaction score
5
Location
MD
TimeSlip.jpg
 
Status
Not open for further replies.

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top