06silverbullet
forum member
i assume you need the caliper bracket from the s550?
If these bolt and center, I doubt there are different spindles for the PP so a 6 piston should bolt and center too maybe?
There is no caliper bracket. These are set up like the 4P brembos, where they are threaded to accept the bolts. Just get the calipers and go.
I would imagine so, but would probably need S197 15" rotors. Looks like the S550 have different part numbers for the rotors.
Yes, they are mine.
Are they centered to the rotor? Hard to tell by the pics. Reason I ask is, I know the S550 rotors are completely different, with the outboard venting instead of inboard on the rotor hats.
I have it priced out on tasca for under 600 lines pads everything
I got a rotor here waiting on ya.
As mentioned, will not happen right away as I have a Chumpcar race at Watkins Glen this coming week, then All-Fords at Carlisle is not long after that, have to get my newly acquired Turbo Coupe ready for the 7-hour drive there.