sickk09gt
Junior Member
Hey guys I'm carlos , I've been on the forum and hardly post at all...I have a 09 Gt , wich Is Sickk09 ...I started off supercharged with a saleen blower , built 281 and blower cams@ 14 psi tuned by lund pump gas it put down 507 hp and 490 Tq on mustang Dyno , cars best time was 10.82 @ 128 and same setup adding 100 shot ,it went 10.40 @ 138 it was all fun and games...till it leaned out..this was my last setup..it was good while it lasted.
Now im on setup...so I decided to go turbo my current mods are listed below
MMR 1500 5.0 STROKER
Billet manley rods
Manley coated pistons 10.1 cr
Forged kellog crank
All arp hardware
Fox lake custom racing heads
Inconel valves, bronze guides
Port and polished , with comp springs and steel retainers
Custom L&M turbo cams with lockouts
Triangle speed oil pump
I have a modded Hellion Kit coated
76/75 billet ball bearing Precision Turbo
Fore return style fuel system( 2) 465's walbro
Bosh 105 injectors
E 85
Frpp intake
stock throttle body
Transmission
T56 magnum xl
Mcleod Rxt
Aluminum flywheel
Aluminum driveshaft
6 point maximum motorsports roll cage
After patiently waiting and down time....and going in this direction , it was time to dyno... the car put down 780 hp and 642 tq on a mustang dyno on 13.8 psi @ 6800 rpm there's plenty more room to grow , I will go up on psi in the future just not now..I just want to enjoy the car , I will keep you posted when I turn it up. ..
Tunned by Lito
being on the s197 forum I have read about Lito and his tunning etc... TuboX on the forum lead me to Lito, he was a big help and tunned my car beyond my expectations very good drivability and power when I want it.. 780 hp 642 tq mustang dyno
Now im on setup...so I decided to go turbo my current mods are listed below
MMR 1500 5.0 STROKER
Billet manley rods
Manley coated pistons 10.1 cr
Forged kellog crank
All arp hardware
Fox lake custom racing heads
Inconel valves, bronze guides
Port and polished , with comp springs and steel retainers
Custom L&M turbo cams with lockouts
Triangle speed oil pump
I have a modded Hellion Kit coated
76/75 billet ball bearing Precision Turbo
Fore return style fuel system( 2) 465's walbro
Bosh 105 injectors
E 85
Frpp intake
stock throttle body
Transmission
T56 magnum xl
Mcleod Rxt
Aluminum flywheel
Aluminum driveshaft
6 point maximum motorsports roll cage
After patiently waiting and down time....and going in this direction , it was time to dyno... the car put down 780 hp and 642 tq on a mustang dyno on 13.8 psi @ 6800 rpm there's plenty more room to grow , I will go up on psi in the future just not now..I just want to enjoy the car , I will keep you posted when I turn it up. ..
Tunned by Lito
being on the s197 forum I have read about Lito and his tunning etc... TuboX on the forum lead me to Lito, he was a big help and tunned my car beyond my expectations very good drivability and power when I want it.. 780 hp 642 tq mustang dyno




