Skwerl's 09 Bullitt part out #2 drive train

[skwerl]

I got the engine and transmission removed today so I'm posting that up first. The supercharger kit has been sold. The exhaust headers and mid pipe have been sold. I'd like to keep the engine fully assembled as a sealed long block because once I start unbolting stuff I need to unbolt everything and this is too nice of a motor to part out. I have almost 4000 miles on the engine since installing it and about 10,000 miles on the T56 transmission.

Engine specs- SOLD
JDM 302E aluminum short block http://www.teamjdm.com/2005-2010-3v-mustang-short-block-motor/ $5995 new
Ford Racing stage three heads https://www.fordracingparts.com/parts/part_details.asp?PartKeyField=11925 $3000+ new
Comp 127450 cams http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=982&sb=0
Livernois cam phaser limiters
All new Ford Racing timing components, lifters and rockers.
New Ford water pump
New 2013 GT500 oil pump and 8.5 quart oil pan
Ford Racing black powdercoated valve covers with no logo
I'll even include the coils, plugs are NGK Iridium 1 step colder than stock.
$7500 picked up. Delivery will need to be arranged. for anywhere within 800 miles of Orlando I may be willing to deliver for a fee.
SOLD

Drake 8.8" girdle cover. SOLD

SCT3 handheld tuner. Unmarried with 4 unlocks left. SOLD.

 

[weather man]

Thanks for for the call Brian.

 

[05moneypit]

I would buy the IW crank pulley if it doesn't go with the engine.

 

[DiMora]

I'll take the transmission setup if it is not sold already.

 

[Macman45]

Willing to sell just the diff cover?

 

[UNDRTKR]

I take it the TVS is sold already.

 

[skwerl]

I take it the TVS is sold already.

Yes, a forum member contacted me earlier in the week and purchased the TVS 1900 head unit. Then another member contacted me the same evening and bought the M90 complete blower setup. Right now I'm down to the engine and rear axle.

 

[UNDRTKR]

Dang it! Thanks anyway.

 

[nitrobob]

How much for just the short block shipped to 63775?

Thanks

 

[roberts]

Would u sell just the valve covers?if so what would be the price shipped to 63628. Thanks


Sent from my iPhone using Tapatalk

 

[konablue11gt]

Brian,

I will show this to a friend who atm is on the way back from the 50th anniversary celebration. I'm pretty sure he is going to be very interested in purchasing the long-block assembly for his whippled 05

 

[skwerl]

Brian,

I will show this to a friend who atm is on the way back from the 50th anniversary celebration. I'm pretty sure he is going to be very interested in purchasing the long-block assembly for his whippled 05

Thanks. I would hate to break this thing open to part it out since it only has 4K miles and isn't even broken in yet. At this point a motor swap could be completed in a day.

 

[skwerl]

Added the 8 rib pulleys and Scott Drake differential cover to the first post

 

[BadPiggy]

Is the IW crank pulley for sale separately?
What % is it?
How many ribs?
How much?

 

[skwerl]

Sorry Chris, it sold already. I guess I need new pictures of the motor.

 

[Lupo222]

Jesus Christ, I didn't know you wrecked your car??? I gotta keep up in here more often. Sorry to hear that bud, Hope you're ok!

I'm interested in hte Drake cover. Just got a new house and the rear is leaking so gonna fix that before i coat and seal my new garage so i don't start out with diff fluid everywhere. what would shipping be to 33330

 

[skwerl]

That price is shipped.
The covers like this will seep around the bolt holes if you don't seal the threads. They don't tell you that in the directions and by the time you find out it's installed. It's very easy to have a leak free cover as long as you put sealer on the girdle threads as well as the fill and drain plug threads before install. An extra 5 minutes with the Permatex before slapping it on is all it takes.

 

[DiMora]

PM sent about ocho-rib setup.

 

[skwerl]

Thanks Shane. 8 rib setup sold.

 

[skwerl]

Bump, added SCT tuner to the first post.

Willing to entertain all serious offers on the engine.