What have you done to your mustang today?

skwerl

tree hugger
Joined
Aug 6, 2011
Posts
16,348
Reaction score
1,334
Location
central Florida
Nice. Were you able to make the spring compressor work for you?

I ended up installing the rockers before the cams. Worked great on the passenger side, had to leave one rocker out on the driver's side then use the spring tool for that one. Took about 5 minutes but I got it. I'll get the spring tool packed up and shipped out this week.
 

GallopingFord

I'm Cam - Mr. Indecisive
Joined
Sep 5, 2010
Posts
15,369
Reaction score
10
Location
Northern Virginia
Chilled out in it

3yjeqaqu.jpg
 

SSPSTANGBANGER

LSx Slayer
Joined
Jul 4, 2013
Posts
1,114
Reaction score
0
Location
Plantersville, Tx
Loaded my newest tune revision with new trans and converter settings and went for a drive.
The converter flashes to almost 5k rpm now
I made a full throttle hit at 60mph and it downshifted and converter flashed to 5k rpm and it felt like it hit the window switch on a 200 shot :)



Sent from my iPhone 5S
 

Whiskey11

SCCA Autoscrosser #23 STU
Joined
Feb 24, 2012
Posts
1,644
Reaction score
4
While I haven't done it "yet" to the GT, I did buy them for the GT:


Time to kiss body roll completely goodbye! :D For those who don't know what the numbers mean, the first number is the length, in inches, 0700 being 7", 0800 being 8". Second number is the diameter, 250 being 2.5" inner diameter but the most important number is the last number, that's the spring rate, in pounds per inch.
 

ChrisGT

Nice Shirt Bilkins
Joined
Jan 25, 2011
Posts
686
Reaction score
2
Location
Huntsville, Alabama
Loaded my newest tune revision with new trans and converter settings and went for a drive.
The converter flashes to almost 5k rpm now
I made a full throttle hit at 60mph and it downshifted and converter flashed to 5k rpm and it felt like it hit the window switch on a 200 shot :)



Sent from my iPhone 5S

Sweet tits, you have any vids of that monster?
 

DILYSI Dave

Member
Joined
Jan 5, 2012
Posts
721
Reaction score
0
Location
Braselton, GA
Installed a Reese trailer hitch so that I could use the family bike carrier with the Mustang. Turns out the Flowmaster people and the Reese people didn't consult one another.

Had to notch about a 4x4 section out of the corner of both mufflers. Re-used the material that I cut off.
1623420_10203490191482575_1704407111_n.jpg


Half rusted out mufflers aren't the greatest thing to weld, but I got them reassembled.
1932453_10203490191442574_1920062226_n.jpg


One down, one to go. The right one I also had to fab a new hanger since I was cutting off the original.
1947814_10203490191282570_423197948_n.jpg


Done.
1964992_10203490191802583_325331780_n.jpg


Done.
1489030_10203490191082565_1602381149_n.jpg


Mission Accomplished!
1016460_10203490191962587_21226784_n.jpg
 

Taxman

One foot out the door
Joined
Nov 14, 2011
Posts
6,661
Reaction score
20
Location
DFW FTW
Installed a Reese trailer hitch so that I could use the family bike carrier with the Mustang. Turns out the Flowmaster people and the Reese people didn't consult one another.

Had to notch about a 4x4 section out of the corner of both mufflers. Re-used the material that I cut off.
1623420_10203490191482575_1704407111_n.jpg


Half rusted out mufflers aren't the greatest thing to weld, but I got them reassembled.
1932453_10203490191442574_1920062226_n.jpg


One down, one to go. The right one I also had to fab a new hanger since I was cutting off the original.
1947814_10203490191282570_423197948_n.jpg


Done.
1964992_10203490191802583_325331780_n.jpg


Done.
1489030_10203490191082565_1602381149_n.jpg


Mission Accomplished!
1016460_10203490191962587_21226784_n.jpg


Words cannot express my thoughts here.
 

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top