What have you done to your mustang today?

[AnotherS197GT]

Removed the passenger fender liner. Is it unwise to leave it off for good?

 

[marcspaz]

It will lead to noisy hinges, lots of dirt in the door jam, and quicker rusting, especially in the seems of the fender and door.

 

[whitestang5]

Put hotchkis lcas on works so much better, no clunk and no more wheel hop, great product. Glad to get rid of the stock lcas. On my last mustang I had poly/poly ends and these with the joint in one end feel much better.

 

[AnotherS197GT]

It will lead to noisy hinges, lots of dirt in the door jam, and quicker rusting, especially in the seems of the fender and door.

I'm generally very good about washing the wheel wells, do you think it will still lead to those things? I would just replace the hardware, but idk if that will help at all.

 

[Fallenauthority]

I'm generally very good about washing the wheel wells, do you think it will still lead to those things? I would just replace the hardware, but idk if that will help at all.

It was fine for the years and miles up until this point right? Its worth a shot to replace the plastic pins to see if it tightens up and goes away. Plus without a fender liner its gonna look UUUUUGGGLLLLYYYY

 

[AnotherS197GT]

It was fine for the years and miles up until this point right? Its worth a shot to replace the plastic pins to see if it tightens up and goes away. Plus without a fender liner its gonna look UUUUUGGGLLLLYYYY

I'm not sure if it was ok. I just did a whole pile of sound deadening and I think that's what brought the noise on. Before I couldn't hear it, now the car is quieter. I'm gonna hit up the parts department at work tomorrow and see if that will fix it. I'm also gonna buy some rattle can deadener and spray it in the wheel wells while I'm at it.

 

[marcspaz]

Eh, I would put one back if it was me.

 

[skwerl]

Today I took my car to the repair shop and unloaded it off my trailer. Exploded the clutch last weekend at the track and also have an Eaton Truetrac getting installed in the rear differential. Going with the Exedy Mach 500 as a replacement clutch.

 

[JEWC_Motorsports]

Good parts going in. Congrats!

 

[Doug M]

Eh, I would put one back if it was me.

Me too, drove a 96 back in the day without one for a while, and impossible to keep it all clean, or keep the door opening good.

 

[marcspaz]

GT500 mufflers for my wife's GT. So nice... LOL

 

[Doug M]

^^Saweet!

 

[mikeyfitz]

Attempted to use ScratchX to get that other persons paint off my bumper. No bueno. Gonna try toothpaste now lol

 

[Doug M]

^^I used a rubbing compound once, and worked. Is this the same thing?

 

[AnotherS197GT]

Eh, I would put one back if it was me.

Me too, drove a 96 back in the day without one for a while, and impossible to keep it all clean, or keep the door opening good.

Thanks. I ordered some spray on dampener. I'll have it in a few days, spray it on and throw the fender liners back in by the weekend.

 

[NotaHybrid]

Just ordered some fr500s mufflers. Finally found someone selling them...

 

[GallopingFord]

Just ordered some fr500s mufflers. Finally found someone selling them...

How did that lead on SVTP pan out?

 

[NotaHybrid]

How did that lead on SVTP pan out?

It should be working out. Thanks man haha. I'll let you know if I see anything on some GTA mufflers.

 

[HEMI LOL]

It should be working out. Thanks man haha. I'll let you know if I see anything on some GTA mufflers.

ive got 10k mile GTBs....

 

[GallopingFord]

It should be working out. Thanks man haha. I'll let you know if I see anything on some GTA mufflers.

ive got 10k mile GTBs....

Glad you got your hands on them. I appreciate it but I bought back my GTAs from John (LAStang). My GTB's are sitting in storage.