Search results for query: *

  • Users: 05gtowner
  • Content: Threads
  • Order by date
  1. 0

    11-14 e-brake fit an 05-09?

    Will the e-brake assembly off a 11-14 fit my 05? They look the same from pics with the exception of the leather handle and boot for the 11-14. there is a huge price difference in the 05-09 vs the 11-14 handle assembly even used.
  2. 0

    Passenger side transfer pump.

    Does anyone know if the transfer pumps on the passenger side of the tank is compatible throughout the years? I keep getting 05 as a stand alone year and 06-09 as a different unit. I keep throwing a P0463 Fuel Level Sensor Circuit High Input code and I am thinking it is the sending unit/jet...
  3. 0

    WTB factory auto shifter.

    Wife needs a new shifter for her 07. The finish on hers is terrible. Let me know if you have one in good shape. Shoot me a price via PM. Thanks
  4. 0

    Injector connector style

    A few of my injector connectors have lost their retention lock. I want to replace them but I am not sure what style they are on stock injectors. Anyone know for sure? I am looking on connectorsfast.net
  5. 0

    WTB passenger side tank sending unit

    Looking for a good condition 08-09 GT passenger side fuel tank sending unit or whatever the hell is in the passenger side of the saddle tanks of our cars. I just replaced the driver side pump, hat and sending unit and am still getting erratic readings from full to half tank. If you got one let...
  6. 0

    Quick question.

    Hey Steve, I need some advice and some pricing. I noticed my car beginning to over heat a bit while driving so I replaced the radiator, water pump and thermostat. Well It was still getting hot. I tracked down a issue at the BEC and Noticed the contact for the high speed fan was slightly melted...
  7. 0

    Temp Gauge reading high at highway speeds

    I was coming to work today and noticed my temp gauge was starting to climb. I did have the AC on and was doing about 80MPH but the gauge has never registered this high before even in the high desert heat. The fan is running with the car up to temp and ac on so the fan works so maybe the...
  8. 0

    Lowering again. Need suggestions.

    So I just replaced my NT450's (275 rears and 255 fronts on stock 17" bullitts were like on ice skating on anything slightly damp) with NT555's and since they don't make a 275 in the 555's I went with the 255's all around. Now the rear wheel gap looks like shit. When I lowered it last year I went...
  9. 0

    Fuel pump for a 05

    I need a fuel pump for my 2005 mustang gt. I believe I am still running the original factory pump. I am looking for a 07-09 pump as the 05-06 had the older pump. The car is all stock so I don't need anything other than OE. I am looking for the full pump, hat and float. PM me if you got one. Thanks.
  10. 0

    Fabulous Fords Forever 4/19/15

    Anyone going this weekend to FFF out at Knotts? Thinking of taking the old hag and the kid to hang out and get a tan.
  11. 0

    Throw out contacing clutch fingers?

    Is the throw out/slave cylinder supposed to be touching the pressure plate fingers at idle with the pedal up and not in gear or clutch fully engaged? I know on a bunch of the older setups I have worked on (Super T10, Muncie M21 and M22) there was supposed to be a spec'd amount of space where the...
  12. 0

    Engine squeak

    Okay some background first. I recently replaced the tired motor in my 05 with a 30K mile takeout engine from LKQ. I replaced the clutch, throwout, pressure plate, friction disc and flywheel while I was there for good measure. After getting it all buttoned up I have this weird squeak. I tired...
  13. 0

    Engine neglect

    Well I got the old (130K) motor out of the 05 and started pulling it apart to check out what was wrong with it (had a loud knock upon start up) I figured it was a phaser or maybe a collapsed lash adjuster/ bad cam follower or maybe even a tensioner. Well It looks like it was just straight up...
  14. 0

    Separator Plate

    Perhaps I am missing something but is the separator plate between the motor and trans on a manual car held on by anything other then the alignment dowels? I have tried to remove it to transfer it over to the new motor but it won't budge. Neither will the dowels. Anyone have any tips for removing...
  15. 0

    Flywheel bolts.

    *Edit* Thank you Steve.
  16. 0

    Flywheel and pressure plate bolts

    Steve, Are these the right bolts I need for the flywheel to crank and pressure plate to flywheel? https://www.tascaparts.com/manual-transmission/flywheel-bolts-4.6l-manual-8-pack/m-6379-b/ https://www.tascaparts.com/clutches-clutch-parts/pressure-plate-bolt-and-dowel-kit-11/m-6397-a46/ The...
  17. 0

    pull motor and trans or just motor

    Which is the easiest pulling the motor and trans connected together or just the engine by itself? Getting ready to swap out the motor and just want to get it done the easiest way possible. I will be doing a new flywheel, and clutch as well if that matters.
  18. 0

    Lower mileage stock replacement or forged motor.

    Now here is the question which would you choose if you goal was a stock replacement with an emphasis on reliability to get me through the next 100K miles like my stock motor did? Money is a factor but I want to do it right the first time. The stock motor currently in the car was good to me for...
  19. 0

    WTB new or low mileage phasers

    Looking for some new or low mileage cam phasers for my 2005 4.6L. Must be in good shape. Let me know what you have. Thank you
  20. 0

    WTB Stock longblock

    Looking for a stock long block in good running condition for my 05. I thought I might be able to fix my issues with a timing kit and some followers and adjusters but it looks like that wont be the case. So I am looking for a takeout long block as complete as I can get it and as low mileage as I...
  21. 0

    Do the auto and manual motors use the same harness?

    Nevermind Found my answer.
  22. 0

    WTB Lash adjusters, followers and timing chain kitet

    Looking to redo the entire valve train on my 05 due to low oil pressure scarring the cam caps and sludge clogging the lash adjusters. Let me know what you have if anything. Thanks
  23. 0

    WTB Front turn signal pigtail

    I need the pig tail and bulb sockets for a 05-09 preferably driver side. I was side swiped and mine got torn off. I have the wires but the sockets and light are gone. Let me know. Thanks
  24. 0

    Throwing FPRS and FPDM codes

    I have a 2005 GT, 5 speed, with a FRPP CAI and procal tune. Nothing special just my daily. Well, today I went out to run to the store and when I got in and tried to fire it up it cranked and started then sputtered and died. I tied to start it again and it just cranked. I ran the codes and got a...
  25. 0

    WTB Factory fan blade wheels

    Looking for factory 06-08 factory 18" fan blade wheels. Option code 64E for wheels. I am in so cal so local is best. Let me know what you got. Thanks.

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top