ATENTION nitrous users need help

[06iornhorse]

I am installing my nitrous kit tomorrow and was wondering where y'all put your spray nozzles I know what the instructions say but I can't get 6" away from the throttle body before the bend so I thought I would ask people that have already done it picks would be great. Thanks in advance for all input.

 

[hamish]

Just try your best to center it. It's ok to put it closer. Mine is right in the middle of the bend in the elbow,I just made sure it was a straight shot towards the middle of the throttle body and somewhat centered in that area.
There was a well known tuner that used to put it about 3 inches from the throttle body with no issues.

 

[Nick@HSW]

Depends on the nozzle too. Take for example our black mamba nozzle, the exit is actually on a 70* angle. This shift allows you to move the nozzle closer to the throttle body and still allows it to cover the face of the blades evenly.

Nick

 

[06iornhorse]

Good to know Nick since it is your nozzle that I am using thanks. I cant wait to get the accessory kit from yall so I can get it all installed and tuned. So I can make it to the pinks later this month. I have everything plumbed except the purge kit and almost all the wiring ran. I figure Tuesday when the rest of the stuff gets here Ill finish up the rest of the wiring and get her tuned on Thursday just in time for the Track this next weekend. I hope to be in the mid to low 11's with a 100 shot. We shall see.

 

[Embalmer]

 

[jroc07gt]

as long it isnt shooting towards the wall of the intake tube you should be fine.

 

[irishpwr46]

yo could probably easily put it in the bend on the jlt seeing as its rubber

 

[mikeysgt]

i have mine in the same spot as embalmer. works fine and should take you into mid to low 11's with no problem as long as you have the right dr's. good luck!

 

[03Glock]

 

[BLKS197]

Nice and sneaky...I wouldn't notice where the nitrous is at a quick glance. If I went the nitrous route that's where I would have put the nozzles.

 

[Nick@HSW]

Good to know Nick since it is your nozzle that I am using thanks. I cant wait to get the accessory kit from yall so I can get it all installed and tuned. So I can make it to the pinks later this month. I have everything plumbed except the purge kit and almost all the wiring ran. I figure Tuesday when the rest of the stuff gets here Ill finish up the rest of the wiring and get her tuned on Thursday just in time for the Track this next weekend. I hope to be in the mid to low 11's with a 100 shot. We shall see.

Nice! Where and which pinks?

 

[06iornhorse]

Dallas raceway For the last chance qualifier to see if I get in to the show. Nick is there any thing else you suggest I pick up to have the safest possible nitrous setup. I bought your kit and accesory kit I already have a wide band to hook up to micro controler.

 

[Nick@HSW]

Dallas raceway For the last chance qualifier to see if I get in to the show. Nick is there any thing else you suggest I pick up to have the safest possible nitrous setup. I bought your kit and accesory kit I already have a wide band to hook up to micro controler.

Honestly that's pretty much the end all to safety. The a/f shut down is the key ingredient for a safe system and what a lot of people neglect to realize is it will catch scenarios where even a FPSS won't. You're pretty well set! Good luck on Pinks, let us know how you make out.

Nick