S&H Turbo Kit Build

[06stangia]

So I ordered a S&H Performance Turbo Kit. The Piping got here the other day so I better get to work. Pictures to come.
-Comp Turbo Technology
CT4-6765 - Rated to 950 HP
Description: CT4-6765 Journal Bearing Turbocharger, ported anti-surge compressor cover (4" inlet, 2.5" oulet) with a 67mm Billet Compressor wheel. HE65mm 10 blade high efficiencey Turbine wheel and a .81 T4 undivided 3" V band turbine housing. Comes with a 1 year warranty from comp.

Hotside components: all 304 stainless steel piping with ss flex couplers and vband connections
-All hotside piping is hi-temp coated satin black to increase spool and reduce heat in the engine bay.
-header connecting pipes 2.5"
-turbo up piping 3"
-down pipe 3" with bung for wideband 02
-3" y pipe split to 2.5" to stock over axle pipes
-38mm wastegate with your choice of 6 or 8 psi spring

Coldside components: all 304 stainless steel
-turbo to intercooler 2.5" piping
-50mm bov
-3" thick frount mount air to air intercooler
-intercooler to engine bay 2.5" and 3" piping to throttlebody
-ss t-bolt clamps and 5-ply silicone couplers
-4" intake tube with 4x7" dual cone filter

Air
-PMAS HPX maf sensor and mounting flange welded on standard.

Fuel system
-550hp drop in fuel hat with walbro 405 pump and fuel system wire upgrade kit
-60lb frpp injectors

Misc
-Oil feed and drain kit
-All installtion hardware
-power steering and oil filter relocation kit
-sway bar relocation kit
-Complete color installation instructions

 

[NotQuik]

First impressions?

I expect no more posts until you have it completed ;-)

 

[06stangia]

The piping is very tight and the instructions are so/so.

 

[06stangia]

Up on jack stands and front off.

 

[AbdullaGT500]

There ya go.

 

[06stangia]

Tires off.

 

[06stangia]

Cats off that was not easy and I boke one of the studs on the drivers side. Had to drill out both bolts in the exhaust manifold on the drivers side.

 

[06stangia]

PIPING CAME TODAY!!!

 

[06stangia]

I have no idea where the small u shaped tubing with the red caps goes.

 

[06stangia]

This is a before shot.

 

[06stangia]

Drivers side to the exhaust manifold.

 

[06stangia]

Passenger side to exhaust manifold.

 

[06stangia]

Y pipe installed.

 

[06stangia]

Waiting on the turbo and fuel system.

 

[mikeyfitz]

Its super easy man. I could take off and put on one of those kits in like 45 minutes now lol

 

[06stangia]

Test fit the rest of the piping.

 

[06stangia]

Relocated.

 

[06stangia]

Still don't know where in going to mount the oil filter.

 

[06stangia]

Tapping the pan was not as bad as i thought it would be.

 

[Weou09]

I have no idea where the small u shaped tubing with the red caps goes.

Dont feel bad...I didn't either. Its not in their install photo and I could not find it in the instructions. Looks like you are also missing the second half of the intercooler bracket. It looks like a stretched out Z. I didn't have it either.