sneak peek of what to come from s&h

[Bobby]

My tuner said once procharger went to that location it made the signal so much better. It it doesnt work on my car i will move it to that strait piece of pipe before we release it.

 

[Timmbo]

How's that hot side coming along?

 

[Bobby]

He is almost finish. He said he will send me more pics tonight.

 

[Timmbo]

He is almost finish. He said he will send me more pics tonight.

Looking forward to it.

 

[Bobby]

Me too

 

[Bobby]

 

[Timmbo]

That looks really nice. Looks like all that's left is the wastegates. Where exactly will he tap those in? Are the intake air filters attaching directly to the compressor inlet or will they be remote mounted toward the front somewhere? With the turbos hanging from the manifold flange is that the only means of support or will there be some sort of support bar for both turbos to the chassis?

 

[Bobby]

Yep thats all he has left. They will be under the hood where you can get to them easy. The driver side filter is just off the turbo. The passenger side goes up to the front because the filter was barely too big to fit with the 3" pipe. The exhaust will hang from the stock hanging point. We are looking into making brackets for support.

 

[Shotokan1509]

Is that built in provisions for cut-outs?

 

[Bobby]

Yes it will come on every kit so you can use them if you want. If you dont want them just let me know when you order the kit.

 

[BMR Tech]

Wow, thats nice!!!!!

 

[Shotokan1509]

Yes it will come on every kit so you can use them if you want. If you dont want them just let me know when you order the kit.

Doh, I missed that you said that in main info post

 

[Bobby]

Thanks man. Dillion will be test fitting it with your k member. I think it will because everything is above the k member.

 

[Timmbo]

What kind of progress was made on the kit this week Bobby?

 

[Bobby]

He is welding the wg tubes up now. He will send me pics later today.

 

[BMR Tech]

Thanks man. Dillion will be test fitting it with your k member. I think it will because everything is above the k member.

SWEEEEEET!

If you guys have any questions, or issues, let me know!

Keep up the good work.

 

[Greg Hazlett]

Plans are in the works to do a 5.0 kit this way, I already have the BMR K member so we will see how it fits as well!

 

[Bobby]

It will fit perfectly because it is built for it. You will have to bring your stock one when you bring the car down so we can test fit both.

 

[Greg Hazlett]

Was that to me Bobby?

 

[Bobby]

Yes