swap

  1. 13Yote

    GT500 Predator Supercharger on Coyote Writeup

    Hello, figured I'd do this writeup since there's not much centralized information for this kind of swap. Below will be my experiences/solutions on doing this swap. Note that this is done on an 11-14 car, and while most aspects will stay the same, there will be minor differences for the 15-17 and...
  2. T

    05 to 05 motor swap

    i have messed my up my body on the 2005 mustang gt premium too many times and tired of having that ''salvaged" stigma lol ... i found a really nice looking donor car with clean title ... same year make model and trim ... i have a custom tune on the original mustang (intake/cams/cat delete/lito...
  3. S

    Misfire/Low Compression on Cyl #8

    I should probably start this by providing a bit of background on my vehicle since I believe it may have ultimately resulted in my currently situation. I bought my Mustang at 32k Miles and have since put another 70k miles on it. Early on in my owning the vehicle my radiator fan stopped working...
  4. Bodvar

    TR3650 Impossible to find shifter hardware

    Hey all. I'm swapping my auto 05 over to a manual. Everything is going fine so far with the limited time I have to work on it. I'm almost done with it, but I'm missing some parts for the shifter assembly for the TR3650. This being the bracket that holds the shifter to the body as well as the...
  5. G

    2013 seats into a 2010

    I bought a set of 2013 leather seats, I own a 2010 S197, and I have been reading that there will be an issue with the airbag lights and whatnot. What do I need to do in order to not have to deal with that issue?
  6. G

    2013 seats into a 2010

    I bought a set of 2013 leather seats, I own a 2010 S197, and I have been reading that there will be an issue with the airbag lights and whatnot. What do I need to do in order to not have to deal with that issue?
  7. C

    4.0 V6 to 5.0 V8 Coyote Swap Guide

    Hello, I have decided to upgrade my 2010 V6 Mustang with a 5.0 Coyote taken from a donor 2011-14 GT. Can anybody *please* provide me with anything of the following: 1) A guide containing steps on how to do it (I am aware of a YouTube series chronicling the entire process, unfortunately the...
  8. C

    4.6 3v Auto into 4.6 3v manual car

    Hello everyone, and thanks for taking the time to read. I recently purchased a project car (2005 Mustang GT) that needed the engine repaired, so I’m currently working on that. But the end goal in purchasing this car was to put that motor in mine (2006 Mustang GT) since it’s built and has a turbo...
  9. Ryan D

    Connecting different style compressor to factory A/C lines

    Really would like to make my A/C work out on this drag week project. Sanden SD7B10 Mini compressor was my only option to fit my setup on this LS swap into an '08 GT. Have the fitting coming today to adapt the compressor flange to o-ring style fittings. Problem is, I need to either go 90*...
  10. 20155h

    Seats swap from 2014 to 2009 v6,4.0

    My car, 2009 Ford Mustang, convertible, v6 4.0. Ok, here we go. I am looking for help and or advice on my problem. Hopefully someone with experience on this could help. The front seats on my 2009 Mustang need replacing due to their condition which are not in good shape are; Drivers side, Some...
  11. T

    New tune after 5R55S to TR3650 swap

    Im gonna be starting my manual swap soon and am very excited. I know mechanically I can get it all functioning fine. My questions arise when it comes to the electronic side. Ive seen most the old posts of these swaps and the good details in them. My car is a 2010 GT (auto) and I got a donor...
  12. I

    Those that did Auto to Manual swap, how did you handle the ecm?

    I have all of the information I need to complete the swap, including all of the parts minus the ecm. I know the ecms are specific to pre/post 07 and to the transmission (auto/stick), but what are the options for swapping an 05? I know the stock auto computer can be reprogrammed, but how? Ive...
  13. K

    Swapping the first gen coyote for the 5.8 trinity

    Hello everyone! I have been playing with the idea of putting the 2014 gt 500 engine into my 2013 mustang gt. I couldn't find someone that has a video of them doing it, and I was wondering if there will be anything extra I have to do, or would it be a pretty straightforward swap? Thank you in...
  14. Bodvar

    3v swap troubleshoot

    I just swapped a new 3v into my 05. The old one didn't have any major modifications and it just has a Borla exhaust, Bama tuner, and cold air. You're basic stuff to get you the 200 extra hp you want... Anyway, I got the swap done and everything seems to be in order. The engine is running lean...
  15. S

    S197 2.3 Ecoboost?

    I know a couple of people have successfully swapped the 3.5 Ecoboost into the S197 chassis, but has anybody done a 2.3 Ecoboost swap? I imagine since Ford sells the control pack it shouldn't be too much of a hassle to get the car running. Does the control pack run everything on it's own, and...
  16. Rageni

    4.0 to 5.0 Coyote Swap AUTO transmission

    Hi there, I’m pretty new at this. I’m just looking for some pointers on how to go about this swap. I’ve got a 2010 4.0 v6 with automatic transmission. I’ve already bought a 2011 5.0 motor and I know that there’s no control pack for auto transmissions for gen 1 coyotes. I’ll have to buy a used...
  17. Y

    5.4 4V navigator into 2007 mustang gt ECU & harness question

    Hello every one, I have read few thread about swapping 2001 navigator engine into s197. I have found that they are using GT500 ECU and Harness. What is the reason? Is it just to prevent extend the COP wires and other sensors wires? or it is deeper than that. I have swapped a navigator engine in...
  18. stangbass

    2010 SC 4.0L to 13 F150 coyote swap.

    Hello fellow S197er's. Name's Al, Had my 2010 4.0l for almost 8 years/+100,000mi in which time it has underwent quite an extensive transformation from stock. Car has been my daily and did a short season of drag and a couple of seasons of HPDE. Previous setup was completely stock 4.0l with...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top