2008 "tigermachine II" Bullitt Mustang build, Pics & Video on Post #518 ...

[Timmbo]

Off to the 50th Mustang event in NC now.

Safe travels Terry! Post some pics of the event if you don't mind.

 

[GallopingFord]

The New "tigermachine" 08 Bullitt Mustang project has officially started, 10-...

Terry where ya at? I was cruising around keeping my eyes peeled for the T- machine


Sent from my SCT X4 using Tunatwat

 

[Paul.]

Finally read through the last several pages of this thread. I'm glad you're enjoying the car. I wish I had the time to drive my car more and attend events like you've done. That said, the "812R" is pretty ridiculous. By your math, my 100% stock 2011 GT made 375 rwhp on the dyno, so I guess that means my 412hp car actually makes 468 hp. I think I'm gonna get some "468R" stickers made for my car.

Also, your writing style is very strange, and it makes your posts difficult to read.

That is, to say, that they are:

"fragmented"

(broken)

{staccato}

FRENETIC

or perhaps a little {[("Schizophrenic")]}


You say that everyone has their own taste and some people will like certain mods, while others won't. However, that seems mildly hypocritical when you're simultaneously scolding people for voicing their opinions on your ridiculous plaque and stickers.

So please, please continue to enjoy your car as much as you seem to. It's clear you're really enthusiastic about it, and at the end of the day, that's what matters. Still, this is the internet. Don't expect to post inflated "crank" numbers backed up by an aborted 12 second pass and not expect people to make fun of you. This is the nature of the internetz. Take it or leave it.

Paul.

 

[tigerhonaker]

Terry

Myonly words will be, careful when u mash the go pedal, those tires are street tires as u are aware

Dave, Your right they are street tires for sure.

I just got back from that 50th Mustang event in NC and Saturday all it did was rain again.

That and only 6 32nds of tread depth, plus extremely soft rubber compound all contribute to my final decision on going with the M/T Street Comp tires.

There is No-Doubt the M/Y ET Radial II tires would be the tire of choice for short trips and IMO limited mileage.

In my case driving thousands of miles in shall we say less than favorable weather conditions they I don't think would work best for me use.

I don't really drive usually on the street like a Crazed-Mad-Man so I think all will be okay with the 305/35-20 Street Comp tires.

If they don't there are a lot of other choices out there now in the market place and I'm certainly not above changing to something else if need be.

Safe travels Terry! Post some pics of the event if you don't mind.

Tim, I would but I did not take any.

Terry where ya at? I was cruising around keeping my eyes peeled for the T- machine


Sent from my SCT X4 using Tunatwat

Cam, I did hear from a fellow that was in a Bullitt Mustang that he met you at the event.

I think he said you might have trailered your Mustang to it.

Sorry I/we missed one another as I would have liked to have said hello in person.

There was no "tigermachine" at the 50th.

I drove our MCS to the hotel and then we rode with Bobby in his 08 Bullitt Mustang back and forth to the events each day.

Finally read through the last several pages of this thread. I'm glad you're enjoying the car. I wish I had the time to drive my car more and attend events like you've done. That said, the "812R" is pretty ridiculous. By your math, my 100% stock 2011 GT made 375 rwhp on the dyno, so I guess that means my 412hp car actually makes 468 hp. I think I'm gonna get some "468R" stickers made for my car.

Also, your writing style is very strange, and it makes your posts difficult to read.

That is, to say, that they are:

"fragmented"

(broken)

{staccato}

FRENETIC

or perhaps a little {[("Schizophrenic")]}


You say that everyone has their own taste and some people will like certain mods, while others won't. However, that seems mildly hypocritical when you're simultaneously scolding people for voicing their opinions on your ridiculous plaque and stickers.

So please, please continue to enjoy your car as much as you seem to. It's clear you're really enthusiastic about it, and at the end of the day, that's what matters. Still, this is the internet. Don't expect to post inflated "crank" numbers backed up by an aborted 12 second pass and not expect people to make fun of you. This is the nature of the internetz. Take it or leave it.

Paul.

Paul, thanks for your post.



Terry

 

[GallopingFord]

Cam, I did hear from a fellow that was in a Bullitt Mustang that he met you at the event.

I think he said you might have trailered your Mustang to it.

Sorry I/we missed one another as I would have liked to have said hello in person.

There was no "tigermachine" at the 50th.

I drove our MCS to the hotel and then we rode with Bobby in his 08 Bullitt Mustang back and forth to the events each day.

I saw you walking around with a group, but couldn't break away from a debate/conversation I was in the middle of - once I did get out of it I just missed you. I saw you walking through the Ford tent (on Thursday) wearing your Brenspeed apparel.... you're a hard guy to miss. lol

I met a lot of guys so I'm not sure who that was. There were a couple Bullitt's staying at my Hotel though. I did trailer my GT500 in and then unloaded the car when I got to the hotel on Wed.

That's a shame that the Tmachine didn't make it, many guys I talked to were looking forward to it.

 

[tigerhonaker]

I saw you walking around with a group, but couldn't break away from a debate/conversation I was in the middle of - once I did get out of it I just missed you. I saw you walking through the Ford tent (on Thursday) wearing your Brenspeed apparel.... you're a hard guy to miss. lol

I met a lot of guys so I'm not sure who that was. There were a couple Bullitt's staying at my Hotel though. I did trailer my GT500 in and then unloaded the car when I got to the hotel on Wed.

That's a shame that the Tmachine didn't make it, many guys I talked to were looking forward to it.

Cam,

I did meet a lot of guys at the event.

And as you say many of them were looking to check out the new "tigermachine".

It is just one of those deals with a completely new machine.

There are things that have to be ironed-out so Brent is having the Bullitt picked up at my house.

Then, they, Brenspeed will make some additional changes to it and I will either drive up and get it or Brent will have it delivered back.

All is good with it and me and in the near future the Bullitt will be at my house once again.

Sorry we were not able to meet up as it would have been nice to have put a face with the text here on S-197.

I'm thinking you might have seen me looking like this or the Brenspeed Gray Hoodie.

Terry

 

[tigerhonaker]

Cam,

Or I was looking like this ...........

My 6-Month Loaner 08 Bullitt Mustang I did have.

This is me filling it up while going to the 50th Mustang event in NC.

Bobby was taking care of some (Personal-Business).






LOL,
Terry

 

[GallopingFord]

Haha, you were rocking the red flannel.

 

[Shotokan1509]

Cam,

Or I was looking like this ...........

My 6-Month Loaner 08 Bullitt Mustang I did have.

This is me filling it up while going to the 50th Mustang event in NC.

Bobby was taking care of some (Personal-Business).

LOL,
Terry

I want that hood so bad!

 

[tigerhonaker]

Haha, you were rocking the red flannel.

The Red I Likeeeeeeeeeeee

I want that hood so bad!

It is Bad Ass !!!

 

[SGTguy]

Terry
It was nice meeting you and Bobby at the hotel Saturday morning. Funny we were at same hotel and I meet you when I am leaving.
Joe

 

[tigerhonaker]

Terry
It was nice meeting you and Bobby at the hotel Saturday morning. Funny we were at same hotel and I meet you when I am leaving.
Joe

Hi Joe,

It is strange sometimes how things work out.

I met people there at the event I had never met before in person.

Then some of the people I thought I would meet I did not.

Saturday was a Disaster with rain and wind all day long.

Thankfully Sunday turned out to be the nicer day !!!

Terry

 

[char259]

I'm sure your finding it hard to stop smiling now that you have it back!!! Enjoy the car and ignore all the BS

 

[tigerhonaker]

I'm sure your finding it hard to stop smiling now that you have it back!!! Enjoy the car and ignore all the BS

Hi Charly,

Actually it is back at Brenspeed this afternoon.





Good Morning All,

The "tigermachine II" is off to Brenspeed this morning.
















tigerhonaker
__________________

 

[tigerhonaker]

Here is a list of what was done to the 2008 Bullitt Mustang at BRENSPEED.

Guys,

Below is a list as best as I can do for what was done at Brenspeed.

It is very possible I might not have everything listed but at least it is complete for the most part.

I also have included Links to information on some of the items.

Thought some of you might be interested so as I said I have included them.

I Do-Not have the camera it is in the Bullitt still at Brenspeed.

Brent had it, (Bullitt Mustang) picked up to do the Final-Tuning etc. on it.


(1) Complete Roush Supercharger set-up.
http://www.brenspeed.com/05-08-mustang-power-adders-roush.html


(2) Ford Racing Stage 3 Racing CNC complete heads (Heads include Phaser Limiters).
http://www.brenspeed.com/m-6050-463vp3.html & http://www.brenspeed.com/m-6049-463vp3.html


(3) Innovators 18% overdrive pulley.
http://www.brenspeed.com/805.html


(4) Roush 2.75 racing supercharger pulley.
http://www.brenspeed.com/spine275r23003v.html


(5) Comp Cams #127450 (Require HD Springs & Phaser Lock-Outs)
http://www.brenspeed.com/127450.html


(6) Seibon SS-Style Carbon Fiber Hood.
http://seiboncarbon.com/store/products/ss-style-carbon-fiber-hood-for-2005-2008-ford-mustang.html


(7) Custom Side Graphics in Matte finish.



(8) Stage 3 Motorsports, 2005-2009 Ford Mustang UPR Billet Radiator Hood Pin Hold Down Kit (Black)
http://www.stage3motorsports.com/1056-09-2005-2009-Ford-Mustang-UPR-Billet-Radiator-Hood-Pin-Hold-Down-Kit-Black.html



(9) Roush Mustang Rear 3-Piece Spoiler (2005-2009) {Painted Highland Green}
http://www.roushperformance.com/parts/Mustang-Rear-Spoiler-2005-2009.html


(10) Roush Emblem 1 (for under hood located on front of Trans. Catch Can)
http://www.roushperformance.com/parts/ROUSH-Fender-Badge.html


(11) Yellow Top Battery.
http://www.brenspeed.com/05-08-mustang-electric-batteries.html


(12) Lakewood Battery Relocation Kit (2005-2009)
http://www.brenspeed.com/30301.html
(George installed on Left Rear so Shaker-1000 Sub-woofer enclosure stayed)


(13) Canton Ice Tank, New Custom Bracket to Locate in Old Battery Location painted to match Bullitt.


(14) Meziere 300 Series Electric Water Pump for Supercharged Application,
http://www.brenspeed.com/wp346s.html

[FONT=Arial, Helvetica, sans-serif]Built to Flow 55 Gallons Per Minute!
http://www.jegs.com/p/Meziere/Meziere-300-Series-Electric-Water-Pumps/756625/10002/-1



(15) Steeda Billet Lower Trailing Arms.
http://www.brenspeed.com/555-4405.html


(16) Ford Racing Differential Cover.
http://www.americanmuscle.com/frpp-88-diff-cover.html


(17) 40 amp Kenne Bell boost a pump for Dual-Pumps.
http://www.brenspeed.com/kb89069.html


(18) Roush Mustang (Trac Pac) High Performance Brake Kit - 6 Piston w/ 14" Rotors.
http://www.brenspeed.com/403144.html


(19) Ford Racing (Rear-Only) Brenspeed Special made up kit for me from Stop-Tech to match the front Roush system.
http://www.brenspeed.com/m-2300-t.html
(New Stainless Braided Brake Lines front & rear)



(20) Raxiom Gen-5 Tail Lights (05-09 All)
http://www.americanmuscle.com/raxiom-gen5-taillights-0509.html?utm_content=raxiom-gen5-taillights-0509&utm_campaign=ShopzillaBasicFitment&utm_source=Shopzilla&utm_medium=Shopping&AMID=raxiom-gen5-taillights-0509-2008-BaseFitment&year=2008&model=



(21) The Driveshaft Shop Carbon Fiber One Piece Driveshaft (05-10 GT)
http://www.americanmuscle.com/dss-cf-driveshaft-0510gt.html?utm_content=GSBasicFitmentV1&utm_campaign=60982307482-avshop&utm_source=Google-pla&utm_medium=Shopping&utm_term=&adpos=1o1&network=g&AMID=dss-cf-driveshaft-0510gt-GSBasicFitmentV1&year=2005&adtype=pla

(22) Seibon SS-Style Carbon Fiber Hood, (Center Section) painted to match Bullitt.

Also the Roush 3-Piece rear spoiler painted to match Bullitt.

Both also had two coats of clear applied.



(23) 2005-2014 MUSTANG SVT Performance Electric Cooling Fan M-8C607-MSVT
http://www.brenspeed.com/m-8c607-msvt.html


(24) The other things that will be done are as follows.
Changing the TCI Superstreet Fighter tranny fluid & filter using ONLY TCI Max Shift & Ford OEM Filter.
http://www.tciauto.com/tc/tcir-max-shifttm-break-in-transmission-fluid-3-gallonshtml/

Changing/Flushing complete Brake-System & installing Racing Brake Fluid.
Changing Rear-End Fluids & replacing with FRPP "ONLY" products with New Ford Racing rear-diff cover.


(25) ROUSH Mustang Hood Struts 2005-2013 Mustangs.
http://www.brenspeed.com/421236.html


(26)
Model: Mustang Engine: 4.6 3V OHV(w/ Roush Super Charger)


6G Alternator 130 AMP (large case) #2158WR(2158WR)
http://www.paperformance.com/scripts/prodView.asp?idproduct=380



(27) Autometer Sport-Comp Monster Shift-Lite Tachometer 5"
http://www.summitracing.com/parts/atm-3905/overview/


(28) Roush Polished Billet Strut Tower Cap Kit.
http://www.brenspeed.com/421327.html


(29) All Polished Steeda Billet Pulleys.
http://www.brenspeed.com/nsearch.html?query=Billet+Pulleys&x=0&y=0&vwcatalog=yhst-35773164622644


(30) Custom BRENSPEED Name Plates with Specs.

Note, The above Roush Hood Struts are or have already been removed.

Seibon says not to use them on their Carbon Fiber Hoods so they are being replaced with the Chrome Hood Brace from (UPR).
http://www.uprproducts.com/mustang-chrome-prop-rod-05.html


They also had to order the correct radiator side panels that are for the Hood-Support-Rod.
http://www.americanmuscle.com/radiator-extension-cover-black.html








Terry aka "tigerhonaker[/FONT]

 

[Macman45]

Terry what rear spoiler is that?

 

[tigerhonaker]

Terry what rear spoiler is that?

Ricky,


(9) Roush Mustang Rear 3-Piece Spoiler (2005-2009) {Painted Highland Green}
http://www.roushperformance.com/parts/Mustang-Rear-Spoiler-2005-2009.html

It really looks very good once on and painted to match.
Glad I went with it as I was back and forth on that decision.

Terry

 

[Timmbo]

When will you have the car back bud?

 

[tigerhonaker]

When will you have the car back bud?

Tim,

Here is an honest reply, I don't know.

Just waiting until they complete what they are doing as I know they are covered up with work.

Trust me buddy when I get it back and clean it up I'll drive over and say hello to you at work.

I'm thinking in the near future but have not heard so don't actually know.

We are all different in how we handle things as we both know and I can only speak for myself that I choose to not bug them.

When it is done they will either deliver it back or I can go pick it up.

Terry

 

[Scott]

Some great upgrades Terry! Lets hope it is not too long before you get the Tigermachine back.