Another S197 to MACH 1

gmantheman

Senior Member
Joined
Apr 5, 2008
Posts
2,060
Reaction score
5
Location
Escondido, CA
Deal breaker right there!

Don't think so, if its a stroked cammer there definetly isnt a cobra crank in it.

And since MMR built it, really could be anything in it. lol

I would also expect a 5.3l stroker 4valve to make more power than that?
The 365/400 are mustang dyno numbers. Dante's modular performance uses a mustang dyno.
 

NjsGT

Back in the game....
Joined
Sep 7, 2009
Posts
3,158
Reaction score
21
Location
NJ
For $13 to 15K it's nearly impossible to find a cobra let alone one that's not been beat. This MACH 1 should be putting down close to the same if not a little more power than a stock 03/04 SVT Cobra.
Very true..... termi's are still very pricey.... Most arent cheaper then say 22k, and thats a high milage termi..... OP, I think you got a nice find and car ahead of ya
 

06silverbullet

Senior Member
Joined
Jul 20, 2010
Posts
3,915
Reaction score
1
Location
orange county, ca
For $13 to 15K it's nearly impossible to find a cobra let alone one that's not been beat. This MACH 1 should be putting down close to the same if not a little more power than a stock 03/04 SVT Cobra.

probably true, i don't see how you're going to get the same power levels unless you through a blower ontop that 4.6 or spray it witch would go perfectly with that high c/r motor.
 

swat 79

Senior Member
Joined
Feb 16, 2009
Posts
1,541
Reaction score
0
Location
MD
After looking at those few pictures, that may be the nicest new edge mustang i've ever seen haha.

Also, isn't the cammer 5.0 a 30k dollar engine?
 

gmantheman

Senior Member
Joined
Apr 5, 2008
Posts
2,060
Reaction score
5
Location
Escondido, CA
Deal breaker right there!

Don't think so, if its a stroked cammer there definetly isnt a cobra crank in it.

And since MMR built it, really could be anything in it. lol

I would also expect a 5.3l stroker 4valve to make more power than that?
The cobra crank was a typo. It's a MMR stroker crank.
 
Back
Top