s197

  1. T

    62mm throttlebody idle problems

    I picked up a 62mm throttlebody. Installed it and used my sct x4 set to 62mm throttlebody. Idle jumps to 1300 and slowly comes down. Car. Shakes vigorously when the idle is below 1000 rpm. I reinstalled stock one for now. What causes this issue?
  2. Dingo7222

    S197 Clunking/rattling sound when accelerating and turning right?

    Alright I have been chasing the cause of this noise since I got the car 5 years ago. The noise started showing up when I would be turning right with the car in 3rd gear at about 1800rpm. If I were to push the clutch in, the noise would go away. If I revved the engine to ~1800 rpm in neutral...
  3. V

    Rear Seat Belts Missing

    Howdy, I finally bought my first mustang about a week ago, and I've been working on cleaning her up and repairing some minor issues here and there. One of the issues is that the rear seat belts are missing. I considered just buying (or building) a rear seat delete kit, but I'd rather keep...
  4. Nate3

    Oil Pump Gear Noise

    Hello, New here and would REALLY appreciate any help. I have a 2014 s197, 30k miles original owner. Car is FBO N/A on e85. I recently took it in to upgrade my OPG/ sprocket. I went with MMR Billet. Installation went smooth, all good. The next day, get in the car, warm up and after a 20-minute...
  5. booster19

    New Owner of a GT500

    Well after much debate and feedback I was convinced, actually educated by members of this forum, I brought home my newest S197 Mustang. I will eventually list the detailed specifications of my car but for now just an introduction. Sitting on 20" Giovanna rims and Pirelli P Zero rubber is my new...
  6. C

    Do you dip? - PlastiDip

    hey guys I wanted to show you one of the coolest cosmetic mods I think I’ve ever done to my car. PlastiDip. It’s something I’ve done to my car twice already and I know I’ll probably never stop. Let me know what y’all think. Share pics if you’ve ever dipped your car!
  7. T

    Best cold air intake for overall peak gains. 4.6 V8

    So I'm debating between getting a JLT series 3 or an Airaid Race Mxp series CAI. Both have good gains but according to American Muscle, the Airaid is said to have more Torque gain (low end) and good HP gain. What is your guys opinion on the best intake paired with a 62mm Throttle body?
  8. A

    05 Convertible BASE -> Coyote 5.0L

    Greetings all! First post here so I'll introduce myself, I'm Joe! Well, I have wanted a mustang since I was a kid (under 10) and last year I had the chance / financial stability to buy one. I really like the amenities of a newer car but the look of the older car, so I went with an '05 and just...
  9. M

    Tail light problems

    After buying my 05 4.0L convertible I noticed the top was leaking and prior to me having it replaced a decent amount of water got into the car. Initially I had no issues other than me having to vacuum all the gunk out but a couple of weeks later some of the brake lights stopped coming on. I...
  10. StephenEbling

    Camshaft Position Sensor DTC

    Hey guys, I am encountering an issue with the notorious P0345/P0349 camshaft position sensor. So far I have: Replaced the sensor Rewired the connector Replaced the alternator The DTC came back just as it was prior. I filled a troubleshooting method which had me check the ground wire in the...
  11. StephenEbling

    Stock S197 Radiator vs Mishimoto Performance Rad

    Hey guys, I made a video comparing the differences between the stock 05-14 GT Radiator and the Mishimoto Performance Radiator Topics Covered: Size Weight Construction materials Construction Quality Pricing Fitment Differences Check it out here:
  12. StephenEbling

    2008 Mustang GT Straight Piped - Redline Rev Video

    Mufflers off Build Vlog here: Stephen's Mustang GT Convertible Build: https://www.youtube.com/playlist?list=PLOLd4xj9_JEFyMET76s2S3GjGOiduauok
  13. StephenEbling

    2008 Mustang GT Convertible Build/Rebuild

    Hey guy and girls! I purchased a wrecked 08 GT Convertible and have been getting it ready. I wanted to document my process to share with anyone considering it I have a YouTube Channel in which I am showing the different stages of the build. Follow along and provide any feedback While I am...
  14. StephenEbling

    2008 Mustang GT Build Questions

    Hey guys/girls This is my first post but I plan to be here awhile. I decided to take the plunge and buy a salvage title car (relatively minor damage) and repair it. I'm documenting the whole build on my YouTube channel. I figure I would go to the knowledgable people and ask questions as they...
  15. G

    Oil Relocation kit issues

    I currently bought the on3 Performance Oil filter Relocation kit for my 06 Mustang GT, i tried installing it but when i tighten the adapter that goes on the block all the way the hose barbs dont point in the direction that i need them to which is down. Instead when i tighten the adapter where...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top