S&H Turbo Kit Build

[weather man]

Hope you make yours all work out Brian

I know Danny at DB Performancecan make it work, but he is gonna have clear instructions...if it bogs down, the kit is coming off. The problem is I am doing a cam swap with my Lunati cams. I told my trans guy to go ahead with putting the 4R70 together. I have visions of cluster fuck dancing in my head! So...worst case, I could have $5,000 of turbo kit and a built 4R70 with converter setup for turbo HP sitting in my shed.

 

[Makdaddy]

I know Danny at DB Performancecan make it work, but he is gonna have clear instructions...if it bogs down, the kit is coming off. The problem is I am doing a cam swap with my Lunati cams. I told my trans guy to go ahead with putting the 4R70 together. I have visions of cluster fuck dancing in my head! So...worst case, I could have $5,000 of turbo kit and a built 4R70 with converter setup for turbo HP sitting in my shed.

I feel Ya
Ill be hoping or the best

If its any consolation I already hit 12 Lbs of boost with my intercooler
All by accident of course
Sorry Op for

 

[weather man]

When LITO says we are done I will go to the dyno for a number. Now first gear tire smoke, second gear tire smoke, 3rd gear pulling hard, and smiling all the way.

Glad your install is going the right way!

 

[Sprayer84]

I feel Ya
Ill be hoping or the best

If its any consolation I already hit 12 Lbs of boost with my intercooler
All by accident of course
Sorry Op for

What intercooler are you using?

Where are you at in Iowa op?

 

[Sprayer84]

Saw you are from Soix City. You going to Rock N Rods this year?

 

[06stangia]

I am running large red 6psi and small yellow 2psi but gauge shows more like 9psi. I am planning on running the car at rock n rods this year. Any of you planning on coming?

 

[06stangia]

Also Makdaddy that is how I am running my shaker system if I remember I will post a picture latter.

 

[Sprayer84]

I am definitely going to be there. My buddy and I will be there from the 19th - 21st. He's bringing a built AMC Javelin.

 

[06stangia]

I will look for you then.

 

[06stangia]

Here it is with the shaker.

 

[06stangia]

 

[06stangia]

Is this the normal height of this pipe or do i need to get it up more. As you can see i already drug it on the driveway.

 

[ctt326]

Is this the normal height of this pipe or do i need to get it up more. As you can see i already drug it on the driveway.

You can get it up a little more, use a jack to jack it up while the v-band is loose then tighten it up. But it will always be kinda low and drag on shit.

 

[mikeyfitz]

The on3/S&H Piping is just really low man

 

[06stangia]

What are you guys running for a spark plug gap.

 

[Greg Hazlett]

.032

 

[Makdaddy]

.34

 

[06stangia]

Thanks guys anyone running the ford racing zero degree plugs if so how did you gap them?

 

[Greg Hazlett]

HT0's and you need the tool to gap them.

 

[Sprayer84]

My ht0's came at .32 and I left him there.