Twin Snail Build...

[1BADHRSE]

Short be interesting to see how long that short block of yours lasts. What kind of boost are you running now?

i am hitting 9 pounds... I will not be installing my Eboost2 controller till i swap the motor... I am just running off the minimum waste gates boost level...

Drilled an tapped the turbo face and just ran the line to the waste gate...

 

[1BADHRSE]

Well tomorrow is now officially the day of truth... As some may know I went to the tuner 2 weeks ago and had to relocate my BOV and adjust my MAF... Now the car idles like a champ and even drives great but detonates in boost...

I have no choice other then to drive her to the dyno so I am going to baby her till I get to the tuner and let her sit for a bit then hopefully be driving her home...

Smoke issue seems to be fixed....

Wish me Luck....

-Joe

 

[05stroker]

Well tomorrow is now officially the day of truth... As some may know I went to the tuner 2 weeks ago and had to relocate my BOV and adjust my MAF... Now the car idles like a champ and even drives great but detonates in boost...

I have no choice other then to drive her to the dyno so I am going to baby her till I get to the tuner and let her sit for a bit then hopefully be driving her home...

Smoke issue seems to be fixed....

Wish me Luck....

-Joe

These are the days I love , your all done and hrs from seeing your hard work pay off.
Good luck!

 

[1BADHRSE]

Still got my nerves going crazy... Hoping nothing goes sour...

 

[rford426]

Good luck man it will go great keep us posted!!!

 

[1BADHRSE]

1 hour till I leave... Did not get much sleep this was on my mind all night... 1h49m and counting....

 

[JeremyH]

The suspense kills i bet..

 

[ZmanM3]

Is it done yet?

 

[rford426]

Patiently Waiting....

 

[ALLOY GT]

RESULTS? nice build turned out really good

 

[1BADHRSE]

Chris is working his way up but so far 470whp at 3500rpms

 

[Natural1]

It's doubtful that I as excited as you but I have been following this for months! I'm anxious to see the final numbers!

 

[1BADHRSE]

The suspense kills i bet..

Ya it does he is still tuning it... He's just tuning in incriments...

 

[stkjock]

@ EFI in CT right?

 

[GrnBullitt08]

Goodluck man, hopefully everything goes well.

 

[ALLOY GT]

Chris is working his way up but so far 470whp at 3500rpms

9lbs right? damn cant wait for final numbers

 

[one eyed willy]

oh man,i was sooo nervous on the dyno for the first time,lol,i could just see everything blowing up......good luck to you man. i also had to work out all my kinks for a few weeks after my initial install. bigger 3" exhaust really helped alot.

 

[1BADHRSE]

@ EFI in CT right?

Yes sir....

Well yet again I am signed up for another session...
The car pulls like a bandit to 5000 then blows out spark... I dont have the tool to gap my HT0 plugs soooooo...

I have to wait another 2 weeks to get on the dyno and Finish... Car runs great as is but I can't rev past 5000...

I am hittig 11psi on and off... Everything is on point just wish I had the frigging autolite plug gapper....

Where's the place to get one...

Ps. Only one numbers I saw was 470wht and 380whp at 3500rpms

 

[GrnBullitt08]

Not too bad.

 

[1BADHRSE]

Well had my first kill tonight on this tune... Car pulls great till 4500 then starts to blow out spark so I just paddled past a hooked up 350...