Going to see what the Saleen blower is really capable of...

MickeySaleen

Barricade
Joined
Mar 31, 2009
Posts
346
Reaction score
1
subscribing. Did I miss what other supporting mods it took to make 488rwhp with only 6.5lbs of boost?

Just so everyone else can see how its done...

series VI saleen blower with Techco's "race port job"
Techco cai
full exhaust, no cats
comp 127500's
beehive springs
retainers
limiter kit
custom dyno tune
3.6" s/c pulley
 

JimIII@JDM

Senior Member
Joined
Sep 15, 2007
Posts
3,065
Reaction score
5
Well I can tell you from our experience with the Saleen series VI charger that making over 600 RWHP wont be a problem and for a street car that is absolutley sicking!! The setup you have looks perfect to me honestly. The 298 stroker is a proven combination with your setup it will provide instant power and boost at the hit of the throttle. You torque curve is going to be rediculous as well. The heads and cams are going to make for a big difference in where the car makes peak HP and how far it will rev up to. Be prepared for a whole new car man!
 

PNR Welding

Senior Member
Joined
Jul 10, 2007
Posts
2,309
Reaction score
5
Location
Hammonton, NJ
I went a 9.99 with a ported blower with a 18% OD pulley and 2.75 upper with a 4R70W trans in it on a nice night. It was about 65 degrees.
It has a JDM stroker in it and Livernois heads stage 3 heads with Comp cams in it. It made 18.5 psi.
 

tigerhonaker

Senior Member
Joined
Apr 11, 2009
Posts
6,516
Reaction score
30
Location
TN
Which car? Ours is an auto and the Shelby has a TR6060. Neither are track only cars... Both are full option full weight street cars :evillaugh:

P.S. Love you sig!

-Rick
Rick,

Just saw you guys at The World Finals in Bowling Green, KY.

1002091453.jpg
 

tigerhonaker

Senior Member
Joined
Apr 11, 2009
Posts
6,516
Reaction score
30
Location
TN
Well I can tell you from our experience with the Saleen series VI charger that making over 600 RWHP wont be a problem and for a street car that is absolutley sicking!! The setup you have looks perfect to me honestly. The 298 stroker is a proven combination with your setup it will provide instant power and boost at the hit of the throttle. You torque curve is going to be rediculous as well. The heads and cams are going to make for a big difference in where the car makes peak HP and how far it will rev up to. Be prepared for a whole new car man!
Saw you guys at The World Finals and you were looking good with that 10.1 run I watched.

1004090943.jpg
 

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top