race4food
forum member
Rebuild is $800 total, porting is not necessary but was allowed for in the budget so I did it. So the engine total was $1050.00. And harness was because I have shoulder surgery in 2 weeks and I would not have time to rewire the harness the way we discussed.
And then I’m getting more power of a Gen3 in a gen 1 setup.
I could have just dropped in the motor with just rings abs bearings and would have been running already but now I have a better than new engine with 1000hp potential.
It is an exercise to show the new kids you don’t need to drop $10k for power.
I sold the stock parts and my 3v so I also have not accounted that into the full total yet.
And then I’m getting more power of a Gen3 in a gen 1 setup.
I could have just dropped in the motor with just rings abs bearings and would have been running already but now I have a better than new engine with 1000hp potential.
It is an exercise to show the new kids you don’t need to drop $10k for power.
I sold the stock parts and my 3v so I also have not accounted that into the full total yet.