Here is what I have on the front:
http://www.strangeengineering.net/d...it-05-08-mustang-4-50-bc-no-hubs-or-brgs.html
Here is what I believe you need on the rear, all though I am not sure what offset you would use, 2.5 or 2.3:
http://www.strangeengineering.net/dragrace/brake-kits-components/pro-steel-rear-brake-kits.html
The front struts I run are single adjustable, and I run the BMR 1 inch lowering springs. You could also just go with a coil over kit. Mine is strictly for drag racing as you know, so I just went with the adjustable drag racing strut.
http://www.strangeengineering.net/d...struts/05-10-mustang-single-adj-strut-ea.html
Rear coil overs, I am afraid I would be of little help as my set up is with the 9 inch rearend, and the shocks/springs were moved inboard. So the length of the shock and height of the spring, as well as the spring rate could be very different. I run the strange double adjustable coil overs with a 14 inch high spring 138 lb/inch.
http://www.strangeengineering.net/dragrace/shocks-struts-springs/coil-over-shocks.html
If you go with the Strange springs, go with the hyper coil ones (NOT the Knight series). The Hypercoils are a much better spring. Spring rate and length just depends:
http://www.strangeengineering.net/dragrace/shocks-struts-springs/springs.html?p=5
I am as much of a fan of Strange stuff as BMR. A great company and good quality stuff. I also run a custom driveshaft they made me and they are great to deal with.